Husqvarna 125B, 125BX-Series, 125BVX-Series manual KEY to Symbols

Page 3

KEY TO SYMBOLS

	Checks and/or main-
	tenance shall be
	carried out after
	having switched off		X
	the engine and discon-
	nected the spark plug.
	Cleaning at regular		X
	intervals is required.		X
	intervals is required.
	Approved protective		X
	goggles or visor must		X
	be worn.
	Approved protective
	goggles or visor, ear	X	X
	protection, and face	X	X
	mask in dusty environ-
	ments must be worn.
	WARNING! The blow-
	er can be dangerous!
	Careless or improper	X	X
	use can cause seri-	X	X
	use can cause seri-
	ous, even fatal injury.
	Read the operator’s
	manual carefully and	X	X
	make sure that you	X	X
	understand the
	contents before using
	the blower.
	WARNING! Make sure
	that the inlet cover is
	locked in the closed	X	X
	position or that the	X	X
	vacuum tube is mount-
	ed on the blower. Never
	touch the impeller un-
	less the unit is off, the
	impeller has stopped
	moving and the spark
	plug is disconnected.
	Always wear approved,	X	X
	protective gloves.	X	X
	protective gloves.
	WARNING! The blower
	may throw objects at
	high velocity that can
	ricochet and hit the	X	X
	operator. This may
	cause serious eye
	damage.

545133423 Rev. 4 9/6/07

The blower operator must make sure that no bystanders or animals come nearer than 15 meters. Whenever several

operators are working X X in the same work area,

they should maintain a safe distance of at least 15 meters from one another.

ChokeX

RefuelingX

Stop switch

X

Instructions on how to X open the inlet cover.

This product is in ac-

cordance with applica- X X ble EC directives.

Noise pressure level measured at 7,5 metres X distance.

Noise emission to the environment according to the European Community’s Directive. X The machine’s emis-

sion is specified in the Technical data section and on the

label.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

English--- 3

Image 3

Contents EN FR ES Contents KEY to Symbols Safety Instructions Other safety measures Cutters 125B X-SERIES Operator’s manual Carburetor adjustment screwsDescription BlowerAccessories 125BX-SERIESand 125BVX-SERIES Throttle trigger Stop switchFan housing Other equipmentBlower tube and nozzle Ground wireInlet cover CuttersAdjusting the carburetor Adjustment screw for idlingChoke Fuel Handling Fuel mixtureFueling Warm engine Starting and StoppingStarting and stopping Cold engineBlowing Using the BlowerTo blow away debris on the ground Fitting the blower tube and nozzle on the blowerFitting the collection bag with the various vacuum tubes To vacuum debris from the ground 125BX-SERIESandStandard nozzle High-velocity nozzleVacuuming Before vacuuming, put on the required safety equipmentMaintenance Maintenance SafetyCarburetor Cooling system Cleaning the air filterLoss of engine power Elevated content of harmful exhaust fumesMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataDeclaration of Conformity