Husqvarna 125B, 125BX-Series, 125BVX-Series manual Contents

Page 2

CONTENTS

Contents

Introduction . . . . . . . . . . . . . . . . . . . 2 Key to symbols . . . . . . . . . . . . . . . . . . 3 Safety instructions . . . . . . . . . . . . . . . 4 Description . . . . . . . . . . . . . . . . . . . . . 6 Fuel handling . . . . . . . . . . . . . . . . . . . . 11 Start and stop . . . . . . . . . . . . . . . . . . . 12 Using the blower . . . . . . . . . . . . . . . . . 13 Maintenance . . . . . . . . . . . . . . . . . . . . 16 Technical data . . . . . . . . . . . . . . . . . . . 19

Note the following before starting:

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice. Long--term exposure to noise can result in permanent hearing impairment. Always use approved hearing protection. This operator’s manual describes in detail how to use and service the blower and how to carry out regular maintenance. It also describes which measures should be taken to achieve maximum safety while operating the blower, how the safety de- vices work and how they should be ser- viced.

Note! The section of the manual that deals with safety, must be read and understood by all persons who come in contact with the blower.

This operator’s manual has been written for those who need guidance when it comes to fault tracing, thorough servicing and carrying out corrective maintenance of the blower.

There are warning symbols on the blower. Should any of the warning symbols on the blower become disfigured or worn, new ones should be ordered and fitted to the blower as soon as possible. Note that some of the warning symbols may be molded in certain components of the blower.

The blower is used for blowing away leaves and other debris on the ground. When operating the blower, the operator must stand with both feet firmly on the ground.

WARNING: Under no circum- stances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of non-authorized accesso- ries or replacement parts.

545133423 Rev. 4 9/6/07

English--- 2

Image 2
Contents EN FR ES Contents KEY to Symbols Safety Instructions Other safety measures Blower Carburetor adjustment screwsDescription Cutters 125B X-SERIES Operator’s manualAccessories 125BX-SERIESand 125BVX-SERIES Other equipment Stop switchFan housing Throttle triggerCutters Ground wireInlet cover Blower tube and nozzleChoke Adjusting the carburetorAdjustment screw for idling Fueling Fuel HandlingFuel mixture Cold engine Starting and StoppingStarting and stopping Warm engineFitting the blower tube and nozzle on the blower Using the BlowerTo blow away debris on the ground BlowingHigh-velocity nozzle To vacuum debris from the ground 125BX-SERIESandStandard nozzle Fitting the collection bag with the various vacuum tubesBefore vacuuming, put on the required safety equipment VacuumingCarburetor MaintenanceMaintenance Safety Elevated content of harmful exhaust fumes Cleaning the air filterLoss of engine power Cooling systemWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical dataDeclaration of Conformity