Husqvarna 170BT, 170BF manual Safety First

Page 4

English

Safety

SAFETY FIRST

Notes on types of warnings

 

 

Instructions contained in warnings within this manual and

WARNING

 

 

 

warning seals marked with a symbol on the blower concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

Instructions labeled as shown above, concern critical steps or procedures which must be followed in order to prevent accidents which could lead to serious bodily injury or death.This mark is used to indicate instructions which must be followed without exception.

IMPORTANT

Instructions labeled as shown above concern steps or procedures which, if not followed correctly, could lead to mechanical failure, breakdown, or damage.

NOTE

Used to label supplementary instructions designed to provide hints or directions useful in the use of the product.

Warning labels on the machine

Symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Hearing protection

• Approved eye protection

Always wear protective gloves.

Wear study, non-slip boots

The blower can forcibly throw objects that can bounce back. This can result in serious eye injuries if the recommended safety equipment is not used.

The blower operator must make sure

that no bystanders or animals come nearer than 50 feet (15 meters). Whenever several operators are

working in the same work area, they should maintain a safe distance of at least 50 feet (15 meters) from one another.

A breathing mask should be used when there is a risk of dust.

Keep all parts of your body away from hot surfaces.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

IMPORTANT

If the warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).

4

Image 4
Contents 130BT 170BT Your Warranty Rights and Obligations MANUFACTURER’S Warranty CoverageOWNER’S Warranty RESPONSI- Bilities Warranty Commencement DateContents Safety Safety FirstSymbols on the machine Safety PrecautionsPosition Intake CUP For EPA only For EPA & CarbAvoid Noise Problem Working ConditionsWorking Circumstance Working PlanUsing the Product Before Starting the EngineTransportation MaintenanceStorage What is what? „ Disposal170BT/170BF 170BT 170BFModel Technical data130BT 170BT 170BF Assembly „ Harness „ Blower Tubes130BT has no waist belt „ HOW to MIX Fuel Fuel„ Fuel „ Fueling the UnitOperation „ Control ARM 170BF„ Starting Engine Close„ Adjusting Idle Speed 1Idling Adjustment Screw 170BT/170BFIdling Adjustment Screw „ Stopping Engine„ AIR Cleaner MaintenanceCleaning AIR Filter „ Fuel Filter „ Spark Plug„ Muffler „ Spark ArresterStorage „ AIR Inlet NET„ Ignition Coil AIR GAP Inspection „ Sholder Strap