English
Safety Precautions
MAINTENANCE
1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.
2.Always be sure to turn off the engine and disconnect the spark plug before performing any maintenance or checking procedures.
WARNING
The metallic parts, engine cover, and area around the engine reach high temperatures immediately after stopping the engine.
3.Examine the blower at intervals for loose fasteners and rusted or damaged parts. Use special care around the fuel line, the muffler, and the ignition wiring.
4.All engine service except for those described in this manual should be performed by competent service personnel. Improper service to the blower fan and muffler could cause a hazardous failure.
5.When replacing the any other part or any lubricant, always be sure to use only Husqvarna products or products which have been certified by Husqvarna for use with the Husqvarna product.
6.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact the nearest Husqvarna servicing dealer for assistance.
7.Do not use any accessory or attachment other than those bearing the Husqvarna mark and recommended for the unit.
8.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.
TRANSPORTATION
•Drain the fuel from the fuel tank before transporting or storing the blower.
•Secure the blower so that it does nor receive damage from shock doing transportation.
•Do not apply strong forces to the blower, such as throwing it or dropping it. Doing so in validates the warranty.
STORAGE
•When storing the blower, choose a space indoors free from moisture and out of the reach of children.
8