Husqvarna BP5 manual Maintenance Storage, Disposal, Sprayer Maintenance Table

Page 8

BP5

 

8. Maintenance

9. Storage

Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter-clockwise. The pump handle has two locking positions, one turning clockwise and one counter-clockwise.

1.Remove cap and pour out remaining solution, then rinse all parts thoroughly with clean water.

2.Add 1/2 gallon of fresh water in tank. Pressurize, and flush pumping system by depressing trigger for at least two minutes; then drain all remaining water.

•Periodically re-grease lid gasket as well as lid vent and pump cylinder, where applicable.

•To ensure good performance, keep lid vent free of obstruction.

•Before and after each use, make sure all connections are well tightened. Service and replace worn parts as required.

Failure to follow manufacturer’s recommendation of use and care of unit will void any expressed or implied warranty. Do not use chlorine or clorox. It will permanently damage pump system.

In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a Husqvarna authorized servicing dealer for assistance.

SPRAYER MAINTENANCE TABLE

 

 

Daily

 

 

 

or

 

System/Component

Procedure

Before Use

After Use

 

 

 

 

Lid Gasket

Grease

3

 

 

 

 

 

Lid Vent

Inspect/Clean

3

 

 

 

 

 

Pump

Grease

3

 

 

 

 

 

Connection

Inspect/Tight

3

 

 

 

 

 

Whole unit

Wash/inspect

 

3

 

 

 

 

Never store chemicals in your sprayer for any length of time

1.Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter-clockwise. The pump handle has two locking positions, one turning cloc kwise and one counter-clockwise.

2.Remove cap and pour out remaining solution, then rinse all parts thoroughly with clean water.

3.Add 1/2 gallon of fresh water in tank. Pressurize, and flush pumping system by depressing trigger for at least two minu tes; then drain all remaining water.

4.Always store tank clean and empty in a dry, shaded location.

10. Disposal

When disposing of your machine, or chemical, be sure to follow your local regulations.

US-8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BP5 Contents Specifications Before UsingParts location For safe operationWorking Plan Using the ProductWorking Condition Maintenance TransportationStorage DisposalSet up HOW to Adjust the Nozzle HOW to Prepare Your Unit for USEPre-operation OperationDisposal Maintenance StorageSprayer Maintenance Table Limited Warranty There are no Other Express Warranties

BP5 specifications

The Husqvarna BP5 is a powerful and versatile backpack blower designed for both professional landscapers and homeowners seeking efficient outdoor maintenance solutions. With its robust construction and advanced technology, the BP5 stands out in the market for its ease of use and high-performance capabilities.

One of the standout features of the Husqvarna BP5 is its highly efficient engine. Powered by a 50.2cc 2-stroke X-Torq engine, this blower offers increased power while reducing fuel consumption and emissions. This technology not only benefits the environment but also allows users to work longer with fewer interruptions for refueling.

The BP5 is designed with ergonomics in mind. Its adjustable harness and padded shoulder straps ensure a comfortable fit, minimizing fatigue during extended use. The fan housing is engineered to provide optimal airflow, resulting in a high blowing force of up to 250 km/h. This impressive airspeed allows users to tackle even the most challenging debris, from leaves to grass clippings, with ease.

Another significant innovation in the Husqvarna BP5 is its LowVib technology, which significantly reduces vibrations from the engine. This feature enhances user comfort and helps to decrease the risk of developing hand-arm vibration syndrome, a concern for those using power tools for lengthy periods.

The BP5 also includes a simple start system, making it easier to initiate the blower with minimal effort. The air filter is easily accessible for quick removal and cleaning, ensuring the engine runs smoothly and efficiently. Additionally, the blower is equipped with a semi-automatic choke for better starting in various weather conditions.

In terms of design, the Husqvarna BP5 boasts a sleek, professional look complemented by its durable materials. Its lightweight construction does not compromise its durability, allowing it to handle the rigors of professional use while remaining manageable for residential users.

Overall, the Husqvarna BP5 backpack blower combines power, efficiency, and user-friendly features, making it an ideal choice for anyone in need of a reliable leaf blower. Whether for professional landscaping or home yard maintenance, the BP5 delivers exceptional performance while prioritizing user comfort and environmental responsibility.
Top Page Image Contents