Husqvarna 1153183-95 manual Basic cutting technique, Terms, Limbing

Page 25

WORKING TECHNIQUES

over the chain saw and the position of the kickback zone.

9Follow the instructions on sharpening and maintaining your bar and chain. When you replace the bar and chain use only combinations that are recommended by us. See instructions under the headings Cutting equipment and Technical data.

Basic cutting technique

WARNING! Never use a chain saw by

! holding it with one hand. A chain saw is not safely controlled with one hand. Always have a secure, firm grip around the handles with both hands.

General

•Always use full throttle when cutting!

•Reduce the speed to idle after every cut (running the engine for too long at full throttle without any load, i.e. without any resistance from the chain during cutting, can lead to serious engine damage).

•Cutting from above = Cutting with a pulling chain.

•Cutting from below = Cutting with pushing chain.

Cutting with a pushing chain increases the risk of kickback. See instructions under the heading How to avoid kickback.

Terms

Cutting = General term for cutting through wood. Limbing = Cutting branches off a felled tree. Splitting = When the object you are cutting breaks off before the cut is complete.

There are five important factors you should consider before making a cut:

1Make sure the cutting equipment will not jam in the cut.

2Make sure the object you are cutting will not split.

3Make sure the chain will not strike the ground or any other object during or after cutting.

4Is there a risk of kickback?

5Do the conditions and surrounding terrain affect how safely you can stand and move about?

Two factors decide whether the chain will jam or the object that you are cutting will split: the first is how the object is supported before and after cutting, and the second is whether it is in tension.

In most cases you can avoid these problems by cutting in two stages; from the top and from the bottom.You need to support the object so that it will not trap the chain or split during cutting.

IMPORTANT! If the chain jams in the cut: stop the engine! Don’t try to pull the chain saw free. If you do you may be injured by the chain when the chain saw suddenly breaks free. Use a lever to open up the cut and free the chain saw.

The following instructions describe how to handle the common situations you are likely to encounter when using a chain saw.

Limbing

When limbing thick branches you should use the same approach as for cutting.

Cut difficult branches piece by piece.

2

1

3

English – 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 3120XP Symbols on the machine KEY to SymbolsSymbols in the operator’s manual EPA Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesCutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge settingBar ChainToo large Increased if the depth gauge setting isTensioning the chain Adjustment of depth gauge settingLubricating cutting equipment Bar and cause serious or even fatal injuryChecking chain lubrication Filling with chain oilChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Fuel HandlingGasoline Two-stroke oilChain oil FuelingExtra chain oil Transport and storage Fuel safetyLong-term storage Starting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsWorking Techniques Terms Basic cutting techniqueLimbing Safe distance Tree felling techniqueFelling direction Directional cuts Clearing the trunk and preparing your retreatFelling cut Freeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburetor MaintenanceHigh speed jet H Correctly adjusted carburetorImmediately Checking the brake triggerStarter MufflerChanging a broken or worn starter cord Changing a broken recoil spring Tensioning the recoil springFitting the starter Spark plug Air filterLubricating the bar tip sprocket Must always be replacedWhen making adjustments Adjustment of the oil pumpNeedle bearing lubrication Cooling systemDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Your Warranty Rights and Obligations Federal Emission Control Warranty StatementEmission Controlwarranty Parts List Safety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsPage Original instructions 1153183-95

1153183-95 specifications

The Husqvarna 1153183-95 is an innovative product from Husqvarna, well-known for delivering high-quality outdoor power equipment. This model is specifically designed to cater to the needs of both amateur gardeners and professional landscapers. Its advanced features and technologies make it a standout choice in the market.

One of the primary features of the Husqvarna 1153183-95 is its durability. Constructed with robust materials, the equipment is built to withstand the rigors of frequent use, ensuring longevity and reliability. The design is not only sturdy but also lightweight, allowing for easier maneuverability.

The 1153183-95 incorporates a powerful engine that delivers superior performance. This engine is engineered for optimum fuel efficiency, ensuring that users can complete their tasks without the worry of frequent refueling. Additionally, the low-emission technology in the engine contributes to a reduced environmental impact, aligning with modern sustainability goals.

An important aspect of the Husqvarna 1153183-95 is its user-friendly controls. The design includes ergonomic handles that provide comfort during extended use. These features reduce fatigue, allowing users to work longer and more efficiently. The intuitive control layout ensures that even novice users can operate the device without difficulty.

Another noteworthy technology included in the 1153183-95 is its cutting system. With precision blades, the equipment ensures clean and effective cutting, making it ideal for various landscaping tasks. The adjustable settings allow users to customize the cutting height, providing versatility based on the specific requirements of a project.

Moreover, this model features an advanced air filtration system. This system not only prolongs engine life but also enhances its performance by ensuring a clean air supply to the engine. This technology reduces maintenance needs and contributes to a smooth operation.

In summary, the Husqvarna 1153183-95 is a powerful and efficient outdoor equipment option, distinguished by its robust construction, user-friendly features, and innovative technologies. It is designed to meet the demands of both casual users and professionals, providing reliability and performance for a myriad of landscaping tasks. Whether you are maintaining a garden or managing a larger landscape, this model efficiently combines power, efficiency, and ease of use, making it a valuable addition to any outdoor toolkit.
Top Page Image Contents