Husqvarna 323RJ, 325RJX-Series manual Fuel Handling, Gasoline, Two-stroke oil, Mixing

Page 15

FUEL HANDLING

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Gasoline

CAUTION! Always use high grade unleaded oil mixed gasoline (minimum 87 RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter and it will no longer serve its purpose.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

This engine is certified to operate on unleaded gasoline.

The lowest recommended octane rating is 87. If you run the engine on lower octane rating than 87 so-called “knocking“ can occur. This leads to an increased engine temperature, which can result in a serious engine breakdown.

When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

For best results and performance use HUSQVARNA two- stroke oil, which is specially formulated for our two-stroke engines. Mixture 1:50 (2%).

Never use two-stroke oil intended for water-cooled outboard engines, sometimes referred to as outboard oil.

Never use oil intended for four-stroke engines.

Gasoline, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

 

 

5

0,10

 

 

10

0,20

 

 

15

0,30

 

 

20

0,40

 

 

US gallon

US fl. oz.

 

 

1

2 1/2

 

 

2 1/2

6 1/2

 

 

5

12 7/8

 

 

Mixing

Always mix the gasoline and oil in a clean container intended for fuel.

Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

Do not mix more than one month’s supply of fuel at a time.

If the machine is not used for some time the fuel tank should be emptied and cleaned.

This engine is certified to operate on unleaded gasoline.

WARNING! The catalytic converter muffler

!gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

English – 15

Image 15
Contents 323RJ 325RJX-series Symbols KEY to SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting equipmentNever use a machine that has a faulty muffler Safety Instructions Cutting equipment Sharpening grass cutters and grass bladesTrimmer head Transport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass clearing using a grass blade General working instructionsTrimming Grass trimming using a trimmer head and plastic bladesWhat is what on the trimmer? What is WHAT?Assembly Fitting the J-handleFitting blades and trimmer heads Fitting other guards and cutting attachments Two-stroke oil Fuel HandlingFuel GasolineFuelling Starting and Stopping Check before startingStarting and stopping Stopping Carburettor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburettor MufflerAir filter Cleaning the air filterCooling system Spark plugMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Pro S35 25 m T35 Page ´z+H¶5¨ Page 1140270-95

323RJ, 325RJX-Series specifications

The Husqvarna 323RJ and 325RJX-Series are premier tools in the realm of multi-purpose trimming and landscaping equipment, crafted for both the professional landscaping user and the passionate homeowner. Renowned for their ergonomic design and advanced technology, these models stand out for their performance, efficiency, and innovation.

One of the key features of the Husqvarna 323RJ and 325RJX is their lightweight construction. Weighing significantly less than traditional trimmers, these tools provide users with the ability to work for extended periods without experiencing fatigue. This is especially beneficial for professionals who manage large landscapes and need to maintain productivity throughout the day.

Equipped with Husqvarna's powerful motors, the 323RJ and 325RJX deliver impressive power-to-weight ratios, allowing them to handle even the toughest jobs with ease. The 325RJX, in particular, is designed with a robust engine that ensures high efficiency while minimizing emissions, making it an environmentally conscious option. This aligns with the increasing demand for sustainable landscaping equipment.

The design of these models features an adjustable shaft, enabling users to customize their reach and comfort while eliminating strain on the user's arms and back. The unique angled head allows for easy trimming around obstacles, ensuring that even the most challenging areas can be maintained with precision.

In terms of technology, the Husqvarna 323RJ and 325RJX incorporate Smart Start and fuel pump features that make starting the engine incredibly easy. Users benefit from reduced resistance in the starter cord, translating to fewer pulls to get the equipment running smoothly. This is a significant advantage, particularly when long periods of inactivity might occur during a project.

Additionally, both models are equipped with dual-line tap-and-go cutting systems, promoting efficient weed trimming and allowing users to quickly release more line as needed, enhancing productivity. The ergonomic handles provide a comfortable grip, and features such as the anti-vibration system minimize fatigue, a critical aspect for prolonged use.

Overall, the Husqvarna 323RJ and 325RJX-Series represent the forefront of trimming technology. With their blend of lightweight design, powerful performance, comfort features, and eco-friendly operation, these tools are essential for any serious landscaper looking to achieve remarkable results with efficiency and ease.