Husqvarna 323RJ, 325RJX-Series manual General safety precautions, Starting, Fuel safety

Page 9

SAFETY INSTRUCTIONS

General safety precautions

IMPORTANT!

The machine is only designed for trimming grass, grass clearing and/or forestry clearing.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Never use the machine in extreme weather conditions such as severe cold, very hot and/or humid climates.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that has been modified in any way from its original specification.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

WARNING! Using an incorrect cutting

!attachment or an incorrectly filed blade can increase the risk of accidents.

Starting

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

The complete clutch cover and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

Fuel safety

Always use a fuel container with an anti-spill valve.

Never refuel the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

Always ensure there is adequate ventilation when handling fuel.

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

4Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

Transport and storage

Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

When storing and transporting fuel always use approved containers intended for this purpose.

When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to find out where to dispose of excess fuel.

English – 9

Image 9
Contents 323RJ 325RJX-series Symbols KEY to SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Muffler Vibration damping systemCutting equipment Locking nutNever use a machine that has a faulty muffler Safety Instructions Cutting equipment Sharpening grass cutters and grass bladesTrimmer head Fuel safety General safety precautionsStarting Transport and storageGrass clearing using a grass blade Basic safety rulesGeneral working instructions Basic working techniquesTrimming Grass trimming using a trimmer head and plastic bladesWhat is what on the trimmer? What is WHAT?Assembly Fitting the J-handleFitting blades and trimmer heads Fitting other guards and cutting attachments Fuel Fuel HandlingGasoline Two-stroke oilFuelling Starting and Stopping Check before startingStarting and stopping Stopping Carburettor MaintenanceCorrectly adjusted carburettor Fine adjustment of the idle speed TMuffler High speed jet HCooling system Cleaning the air filterSpark plug Air filterDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Pro S35 25 m T35 Page ´z+H¶5¨ Page 1140270-95

323RJ, 325RJX-Series specifications

The Husqvarna 323RJ and 325RJX-Series are premier tools in the realm of multi-purpose trimming and landscaping equipment, crafted for both the professional landscaping user and the passionate homeowner. Renowned for their ergonomic design and advanced technology, these models stand out for their performance, efficiency, and innovation.

One of the key features of the Husqvarna 323RJ and 325RJX is their lightweight construction. Weighing significantly less than traditional trimmers, these tools provide users with the ability to work for extended periods without experiencing fatigue. This is especially beneficial for professionals who manage large landscapes and need to maintain productivity throughout the day.

Equipped with Husqvarna's powerful motors, the 323RJ and 325RJX deliver impressive power-to-weight ratios, allowing them to handle even the toughest jobs with ease. The 325RJX, in particular, is designed with a robust engine that ensures high efficiency while minimizing emissions, making it an environmentally conscious option. This aligns with the increasing demand for sustainable landscaping equipment.

The design of these models features an adjustable shaft, enabling users to customize their reach and comfort while eliminating strain on the user's arms and back. The unique angled head allows for easy trimming around obstacles, ensuring that even the most challenging areas can be maintained with precision.

In terms of technology, the Husqvarna 323RJ and 325RJX incorporate Smart Start and fuel pump features that make starting the engine incredibly easy. Users benefit from reduced resistance in the starter cord, translating to fewer pulls to get the equipment running smoothly. This is a significant advantage, particularly when long periods of inactivity might occur during a project.

Additionally, both models are equipped with dual-line tap-and-go cutting systems, promoting efficient weed trimming and allowing users to quickly release more line as needed, enhancing productivity. The ergonomic handles provide a comfortable grip, and features such as the anti-vibration system minimize fatigue, a critical aspect for prolonged use.

Overall, the Husqvarna 323RJ and 325RJX-Series represent the forefront of trimming technology. With their blend of lightweight design, powerful performance, comfort features, and eco-friendly operation, these tools are essential for any serious landscaper looking to achieve remarkable results with efficiency and ease.