Trimmer head

GENERAL SAFETY PRECAUTIONS

Sharpening grass cutters and grass blades

•See the cutting attachment packaging for correct sharpening instructions.

•Sharpen blades and cutters using a single-cut ﬂat ﬁle.

•Sharpen all edges equally to maintain the balance of the blade.

WARNING! Always discard a blade that is

!bent, twisted, cracked, broken or damaged in any other way. Never attempt to straighten a twisted blade so that it can be reused. Only use original blades of the speciﬁed type.

•Only use the recommended trimmer heads and trimmer cords.These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

•Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

•The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

•Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

•To increase the life of the cord it can be soaked in water for a couple of days.This will make the line tougher so that it lasts longer.

IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

English – 11