ASSEMBLY
Fitting the guard extension
143R
CAUTION! The guard extension shall always be fitted when using the trimmer head/plastic blades and combination guard. The guard extension shall always be removed when using the grass blade and combination guard.
Enter the guard extension guide in the slot of the combination guard. Then click the guard extension into position on the guard with the four
The guard extension is removed easily using the spark plug spanner, see illustration.
Fitting the transport guard
1Insert the tips of the blade into the grooves in the transport guard (A).
2Wind the transport guard around the teeth of the blade, then clip the ends together (B).
A B
Fitting a blade guard, grass blade and grass cutter
•132R: The blade guard (A) is fitted using 4 screws (L) as shown. CAUTION! Use the recommended blade guard. See the Technical data section.
L
A
133R: Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt (L).
142R: Fit the guard (A) to the gear housing using the support plate (M) and two screws (L).
CAUTION! Ensure that the guard extension is removed. Use the recommended blade guard. See the Technical data section.
L
M
A
143R: Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CAUTION! Ensure that the guard extension is removed. Use the recommended blade guard. See the Technical data section.
A
•Fit the drive disc (B) on the output shaft.
•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.
•Insert the locking pin (C) in the hole to lock the shaft.
•Place the blade (D), support cup (E) and support flange
(F) on the output shaft.
English – 13