Husqvarna 128R manual Fuelling, Mixing, Add the remaining amount of petrol, Operating problems

Page 14

FUEL HANDLING

Mixing

SAlways mix the petrol and oil in a clean container intended for fuel.

SAlways start by flling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.

Add the remaining amount of petrol.

SMix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

SDo not mix more than one month’s sup-

ply of fuel at a time.

SIf the machine is not used for some time, the fuel tank should be emptied and cleaned.

WARNING: The catalytic con- verter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapors.

Fuelling

WARNING: Taking the following precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refueling.

Always stop the engine and let it cool for a few minutes before refu- elling.

When refueling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refueling.

Always move the machine away from the refueling area before starting.

SClean the area around the fuel cap. Contamination in the tank can cause

operating problems.

SEnsure that the fuel is well mixed by shak- ing the container before filling the tank.

Min. 3 m

545196768 Rev. 3 5/15/09

English--- 14

Image 14

Contents EN 2-27 FR 28-53 ES Always wear Symbol ExplanationSymbols Contents 10 11 22 15 2127 What is WHAT?What is what? Support flangePersonal protective equipment General Safety PrecautionsWear anti--slip and stable boots Rev 5/15/09 Machine’s safety equipment Throttle lock-outCutting attachment guard Stop switchNever use a machine that has a faulty muffler Rev 5/15/09 Harness quick releaseReduce the risk of blade thrust Cutting equipmentLocking nut Sharpening grass cutters and grass blades Cutting equipmentGeneral rules Trimmer headFitting the harness AssemblyFitting the handlebar Correct height Fitting blades and trimmer heads Fitting a blade guard, grass blade and grass cutter Correct balanceFitting the trimmer guard and trimmer head Fuel Fuel safetyFuel Handling Mixing Operating problemsFuelling Add the remaining amount of petrolStarting and stopping Starting and StoppingCheck before starting Cold engineStopping Warm engineFor throttle handles with a start throttle lock-out This can damage the machineGeneral working instructions Basic safety rulesWorking Techniques Basic working techniquesTrimming Grass clearing using a grass bladeGrass trimming with a trimmer head ClearingCutting SweepingMaintenance CarburetorSpark plug Unit/Maintenance SafetyMuffler Air filter Cleaning the air filterLoss of engine power Bevel gearMaintenance schedule Maintenance Daily Weekly Monthly Maintenance MaintenanceTechnical Data Technical data09--1--31 Declaration of ConformityEC Declaration of Conformity Only applies to Europe Trimmer Head Line Loading Instructions Plastic Blades Tri Cut