Husqvarna 128R Maintenance schedule, Maintenance Daily Weekly Monthly Maintenance Maintenance

Page 23

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the main- tenance and service work described in this Operator’s Manual. More extensive work must be carried out by an authorised service workshop.

	Maintenance	Daily	Weekly	Monthly
	Maintenance	Maintenance Maintenance		Maintenance
		Maintenance Maintenance		Maintenance
	Clean the outside of the machine.		X
	Make sure the throttle trigger lock and the
	throttle function correctly from a safety point		X
	of view.		X
	Check that the stop switch works correctly.		X
	Check that the cutting attachment does not
	rotate at idle.		X
	Clean the air filter. Replace if necessary.		X
	Check that the guard is undamaged and not
	cracked. Replace the guard if it has been
	exposed to impact or is cracked.		X
	Check that the trimmer head is undamaged
	and not cracked. Replace the trimmer head
	if necessary.		X
	Check that the locking nut of the cutting
	equipment is tightened correctly.		X
	Check that nuts and screws are tight.		X
	Check that there are no fuel leaks from the
	engine, tank or fuel lines.		X
	Check the starter and starter cord.		X
	Clean the outside of the spark plug. Re-
	move it and check the electrode gap. Adjust
	the gap to 0,6 mm or replace the spark plug.
	Check that the spark plug is fitted with a
	suppressor.		X
	Clean the outside of the carburetor and the
	space around it.		X
	Check that the bevel gear is filled three--
	quarters full with lubricant. Fill if necessary
	using special grease.		X
	Check the fuel filter from contamination and
	the fuel hose from cracks or other defects.			X
	Replace if necessary.			X
	Check all cables and connections.			X
	Check the clutch, clutch springs and the
	clutch drum for wear. Replace if necessary
	by an autorized service workshop.			X
	Replace the spark plug. Check that the
	spark plug is fitted with a suppressor.			X
	Clean or replace the spark arrestor mesh
	on the muffler.			X

545196768 Rev. 3 5/15/09

English--- 23

Image 23

Contents EN 2-27 FR 28-53 ES Always wear Symbol ExplanationSymbols Contents Support flange What is WHAT?What is what? 10 11 22 15 2127Personal protective equipment General Safety PrecautionsWear anti--slip and stable boots Rev 5/15/09 Throttle lock-out Machine’s safety equipmentHarness quick release Stop switchNever use a machine that has a faulty muffler Rev 5/15/09 Cutting attachment guardReduce the risk of blade thrust Cutting equipmentLocking nut Trimmer head Cutting equipmentGeneral rules Sharpening grass cutters and grass bladesFitting the harness AssemblyFitting the handlebar Correct balance Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter Correct heightFitting the trimmer guard and trimmer head Fuel Fuel safetyFuel Handling Add the remaining amount of petrol Operating problemsFuelling MixingCold engine Starting and StoppingCheck before starting Starting and stoppingThis can damage the machine Warm engineFor throttle handles with a start throttle lock-out StoppingBasic working techniques Basic safety rulesWorking Techniques General working instructionsClearing Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburetor MaintenanceSpark plug Unit/Maintenance SafetyMuffler Bevel gear Cleaning the air filterLoss of engine power Air filterMaintenance Daily Weekly Monthly Maintenance Maintenance Maintenance scheduleTechnical data Technical Data09--1--31 Declaration of ConformityEC Declaration of Conformity Only applies to Europe Trimmer Head Line Loading Instructions Plastic Blades Tri Cut