Husqvarna 128R manual Symbol Explanation, Symbols, Always wear

Page 2

SYMBOL EXPLANATION

Symbols

WARNING: Clearing saws, brush- cutters and trimmers can be dan- gerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

SA protective helmet where there is a risk of falling objects

SHearing protection

SApproved eye protection

Max. speed of output shaft, rpm

Beware of thrown objects and ricochets.

The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres.

Machines fitted with grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle mounting.

Always wear approved protective gloves.

Use anti--slip and stable boots.

Only use non--metallic, flexible cutting attachments, i.e. trimmer heads with trimmer line.

545196768 Rev. 3 5/15/09

This product is in accordance with applicable EC directives.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in the Technical data section and on label.

Sound pressure level at 7,5 metres.

Use unleaded or quality leaded petrol and two--stroke oil mixed at a ratio of 2% (1:50).

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Stop the engine by pushing and holding the stop switch

in the STOP position. CAUTION! The stop switch automatically returns to the start position.

In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

English--- 2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents EN 2-27 FR 28-53 ES Always wear Symbol ExplanationSymbols Contents 10 11 22 15 2127 What is WHAT?What is what? Support flangePersonal protective equipment General Safety PrecautionsWear anti--slip and stable boots Rev 5/15/09 Machine’s safety equipment Throttle lock-outCutting attachment guard Stop switchNever use a machine that has a faulty muffler Rev 5/15/09 Harness quick releaseReduce the risk of blade thrust Cutting equipmentLocking nut Sharpening grass cutters and grass blades Cutting equipmentGeneral rules Trimmer headFitting the harness AssemblyFitting the handlebar Correct height Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter Correct balanceFitting the trimmer guard and trimmer head Fuel Fuel safetyFuel Handling Mixing Operating problemsFuelling Add the remaining amount of petrolStarting and stopping Starting and StoppingCheck before starting Cold engineStopping Warm engineFor throttle handles with a start throttle lock-out This can damage the machineGeneral working instructions Basic safety rulesWorking Techniques Basic working techniquesTrimming Grass clearing using a grass bladeGrass trimming with a trimmer head ClearingCutting SweepingMaintenance CarburetorSpark plug Unit/Maintenance SafetyMuffler Air filter Cleaning the air filterLoss of engine power Bevel gearMaintenance schedule Maintenance Daily Weekly Monthly Maintenance MaintenanceTechnical Data Technical data09--1--31 Declaration of ConformityEC Declaration of Conformity Only applies to Europe Trimmer Head Line Loading Instructions Plastic Blades Tri Cut
Top Page Image Contents