Husqvarna 136, 141 instruction manual

Page 14

EU Declaration of Conformity relating to 2000/14/EC

We, Poulan/Weed Eater, Division Electrolux North America, Inc., Texarkana, TX,

75501, USA, Tél. : +1 903 223 4100, declare under sole responsibility that the Husqvarna models 136/141 chain saws were assessed in accordance with Annex V of the DIRECTIVE and from serial numbers 2001--305(N or D)00001 and onwards, conforms to the provisions of the DIRECTIVE. The net power is 1.6 kW or 1.9 kW. For the model 136, the measured sound power is 107,7 dB and the guaranteed sound power is 118 dB. For the model 141, the measured sound power is 108,2 dB and the guaranteed sound power is 118 dB.

Texarkana 01--12--17

Michael S. Bounds, Director

Product Safety and Standards

EU declaration of conformity (Directive 89/392/EEC, Annex II, A) (Only applies to Europe)

We, Poulan/Weed Eater, Division Electrolux North America, Inc., Texarkana, TX 75501, USA, Tel: +1 903 223 4100, declare under sole responsibility that the Husqvarna models 136/141 chain saws from serial numbers 2001--305(N or D)00001 and onwards, follows the provisions of the DIRECTIVES: 89/392/EEC (machinery) and 89/336/EEC (electromagnetic compatibility), including amendments and is in conformity with the following standards: EN 292-2, EN 608 and CISPR 12.

The supplied chain saw conforms with the sample that underwent the EU type approval. Notified body, 0404 the Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S--754 50 Uppsala, Sweden, has carried out EU type approval. The certificate(s) are numbered: 136 - 404/98/574, 141 - 404/98/575.

Texarkana 01--12--17

Michael S. Bounds, Director

Safety and Standards

14

Image 14
Contents English 20 19 Cylinder Cover Bar Tip Sprocket Front Handle Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionMaintain Control KickbackReduce the Chance Kickback Kickback Safety Features Chain BrakeInside view Chain Brake Adjustment located on Chain Brake Attaching the Optional Bumper SpikeFueling Engine BAR and Chain LubricationStarting a Warm Engine ON/STOP Switch CHOKE/FAST Idle LeverImportant Points to Remember Chain BrakeFelling Large Trees Important PointsTree Felling Techniques Types of Cutting Used for Bucking Notch CUT and Felling the TreeCutting a Fallen Tree Limbing and Pruning Important Points Bucking Using a LOG or Support StandBucking Without a Support LimbingStorage Troubleshooting Table Cause Remedy Page Husqvarna H30 ISO 7182 and ISO 9207, calculated as 325 Power, m/sec 16,3 Pitch, inches 325Rear handle, m/s Husqvarna H30Also See