How to program phone numbers:
You can enter a maximum of nine telephone numbers for the alarms. Each number can be a maximum of 32 digits. (If you are using this Auto Dialer on an office/work phone system you may have to enter 9 before the number to get a line out.)
1.Key in the four digit user password code (factory default is 1234.)
2.Press PROGRAM > 3 > ENTER.
3.The number you press next will select the position in the sequence you want that telephone number to dial (1 = first number called, 2 = second number called, and so on).
4.Press ENTER and key in the first telephone number.
5.Press ENTER to exit the programming mode.
6.Repeat the process until you have entered all the numbers you wish the Auto Dialer to call once it has been activated (maximum 9 different numbers.)
Quick guide: Press 1 2 3 4 > PROGRAM > 3 > ENTER > 1 > ENTER > Telephone # > ENTER
How to delete phone numbers:
1.Key in the four digit user password code (factory default 1234.)
2.Press PROGRAM > 3 > ENTER.
3.Press N (N = 1 for the first number called; 2 for the second number called; etc.)
3.Press ESC to exit the programming mode.
Quick guide: Press 1 2 3 4 > PROGRAM > 3 > ENTER > N > ESC
7
10/15/2009 10:20:44 AM
