Spa Shell Diagram

P A P A

J I

M L

Refer to the diagram above. The function of each component is explained below.

A. The four adjustable, directional jets can be pivot- ed to direct their water flow. To open the jets, turn the rims counterclockwise; to close the jets, turn the rims clockwise. If no air flows through the jets, turn the jets counterclockwise. Close the jets to increase the water pressure to other jets.

B. The adjustable, pulsing jet produces a soothing, pulsing massage action. To open the jet, turn the rim counterclockwise; to close the jet, turn the rim clockwise.

C. The large rotary jet features two jets of water that provide a pulsing, spinning massage action. Turn the jet counterclockwise to open it or clockwise to close it.

D. The four whirly jets provide a continuous whirling massage action.

E. The three small adjustable, directional jets can be pivoted to direct their water flow. Turn the rims of the jets to open and close them.

F.The two fixed jets are always on.

G.An optional ozone generator can be purchased and installed to utilize the ozone jet. Ozone provides a

way to help sanitize the spa with minimal chemical treatment.

H. The skimmer cleans the surface of the water.

I.The temperature probe monitors water temperature.

J.The underwater light can be used for night opera- tion (see USING THE CONTROLS on page 12).

K.The two suction vents near the floor of the spa bring water into the pumps in order to operate the system. Never operate the spa without the suc- tion covers in place.

L, M. The air controls determine the amount of air flowing through the indicated jets during opera- tion (see USING THE CONTROLS on page 12).

N. The filter can be removed for cleaning or replace- ment (see CHECKING AND CLEANING THE FIL- TER on page 13).

O. The console controls the jets, turns the underwater light on and off, and adjusts the water temperature setting (see USING THE CONTROLS on page 12).

P.The three pillows can be removed or turned 180° to provide two positions of comfort.