Image IMHS40090 manual

Page 4

you should also keep the power cord away from lawn mowers, hedge trimmers, and other similar equipment.

22.WARNINGÑThe power cord is equipped with a Ground Fault Circuit Interrupter (GFCI), located at the end of the power cord. The GFCI must be tested before each use. To test the GFCI, press the ÒtestÓ button while the spa is running. The spa should shut off. Press the ÒresetÓ button. The spa should resume normal operation. If the spa contin- ues to run after the ÒtestÓ button is pressed, then the GFCI is damaged. Do not use the hydrotherapy spa until the GFCI has been repaired or replaced by a qualified electri- cian.

23.DANGERÑRisk of electric shock. Keep all electrical appliances such as radios, tele- phones, televisions and lights at least five feet away from the water.

24.A wire connector is provided on the pump motor of this unit to connect a minimum No. 8 AWG (804 mm2) solid copper conductor between this unit and any metal equipment, electrical enclosure made of metal, metal water pipes, or conduit within five feet of the unit.

25.DANGERÑRisk of electric shock: Do not set up the hydrotherapy spa within five feet of any metal objects or surfaces. As an alterna- tive, you may use the hydrotherapy spa with- in five feet of metal objects if each metal object is permanently connected to the wire connector on the pump motor of this unit by a minimum No. 8 AWG (804 mm2) solid cop- per conductor (see instruction 24).

26.Do not operate the pump motor when the spa is empty. The pump motor may be seriously damaged if it is operated without water circu- lating.

27.DANGERÑRisk of drowning: Exercise extreme caution to prevent unauthorized and unsupervised use of the hydrotherapy spa by children. Children must always be super- vised.

28.DANGERÑTo reduce the risk of drowning:

¥Never use the hydrotherapy spa alone.

¥Children should not use the hydrotherapy spa unless they are supervised by an adult.

¥Keep pets away from the hydrotherapy spa at all times.

¥Always replace and lock the spa cover when the hydrotherapy spa is not in use.

29.WARNINGÑTo reduce the risk of injury: The water temperature should never exceed 104¡F. Temperatures between 100¡F and 104¡F are considered to be safe for healthy adults. However, if you plan to remain in the hydrotherapy spa for more than 10 to 15 min- utes, a lower temperature is recommended. Lower temperatures are also recommended for children. Children should not be allowed to swim under the surface of the water in the spa.

30.WARNINGÑTo reduce the risk of injury: Always use an accurate thermometer to determine the water temperature before using the hydrotherapy spa.

31.WARNINGÑTo reduce the risk of injury: Pregnant women should consult with their physician before using the hydrotherapy spa. Pregnant women should not use the hydrotherapy spa if the water temperature is above 100¡F; the unborn child could be seri- ously harmed. This is especially important during the first 90 days of the pregnancy.

32.DANGERÑTo reduce the risk of drowning: Prolonged immersion in the hydrotherapy spa may cause hyperthermia, a dangerous condition which occurs when the internal body temperature rises several degrees above the normal body temperature of 98.6¡F. The symptoms of hyperthermia are nausea, dizziness, drowsiness and fainting. Effects include: a lack of awareness, inability to per- ceive heat or danger and a greater risk of drowning due to a loss of consciousness. Special note: Individuals suffering from hyperthermia may be unable to realize that they must exit the hydrotherapy spa, and they also may be physically unable to do so.

33.WARNINGÑTo reduce the risk of drowning: Do not use the hydrotherapy spa if you are under the influence of alcohol or drugs. Heat from the water, in conjunction with alcohol or drugs can cause loss of consciousness.

34.WARNINGÑTo reduce the risk of injury or drowning: Consult your physician about pos- sible side-effects of any medications you may be taking before using the hydrotherapy spa. Heat from the water, in conjunction with some medications may cause drowsiness and increase the risk of drowning. Other medications can effect blood pressure, heart

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Customer HOT Line Model No. IMHS40090 Serial NoPatent Pending Table of Contents Posting the Warning SignImportant Safety Instructions Read and Follow ALL InstructionsPage Page Before You Begin If you set up the hydrotherapy spa inside If you set up the hydrotherapy spa outsideChoosing a Location for the Hydrotherapy Spa Do not use an extension cord with the hydrotherapy spaAssembly Page Using the Hydrotherapy Spa Testing and Treating the WaterPlugging in the Hydrotherapy SPA Starting the Hydrotherapy SPASpa Shell Diagram SPA OperationSecuring the SPA Cover Without the suction covers in placeConsole Diagram Using the ConsoleMaintenance Attaching and Removing the Access Cover Water ChemistryMaintaining the Proper PH Balance Draining the Hydrotherapy SPAWinter USE and Care From the pump. Note For additional protectionYou can remove the pump/motor from the spa To store it in a climate-controlled roomMaintenance Notes Trouble-shooting Part List Ñ Model No. IMHS40090 Key No. Qty DescriptionExploded DrawingÑModel No. IMHS40090 Limited One Year Massage Spa Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

IMHS40090 specifications

The IMHS40090 stands as a notable image within its class, characterized by a combination of advanced technologies and user-centric features designed for optimal performance. This versatile device integrates cutting-edge imaging capabilities to cater to various applications, ranging from industrial inspections to medical diagnostics.

At the heart of the IMHS40090 is a high-resolution sensor that enables the capture of intricate details. This sensor is capable of producing images with remarkable clarity, ensuring that users can rely on the device for critical analysis. The resolution not only allows for clear images but also enhances the ability to discern subtle changes in the subject matter, which is particularly valuable in regulated environments.

One of the standout characteristics of the IMHS40090 is its advanced image-processing algorithms. These algorithms work seamlessly to enhance image quality in real-time, applying adjustments that optimize contrast, brightness, and color accuracy. This enhances the user experience by providing immediate feedback, which is vital in fast-paced environments. Additionally, the device’s support for multiple imaging modes, including thermal imaging and standard light capture, expands its utility across different fields.

Connectivity is another essential factor in today's imaging devices, and the IMHS40090 excels in this aspect. It features built-in wireless technology that allows for easy sharing and upload of images to cloud platforms or other devices, facilitating instant collaboration among teams regardless of their geographical location. This connectivity feature is complemented by a user-friendly interface that simplifies the operation, making the device accessible to users with varying levels of technical expertise.

The IMHS40090 is also designed with durability in mind. Constructed from high-quality materials, it ensures resilience in demanding environments. This durability is crucial for industries where equipment frequently encounters harsh conditions, as it guarantees the longevity and reliability of the device.

In summary, the IMHS40090 is a sophisticated imaging solution that combines high-resolution capture, advanced processing capabilities, adaptable imaging modes, seamless connectivity, and robust construction. These features collectively position it as a premier choice for professionals seeking a reliable imaging device equipped to meet the diverse challenges of modern applications. Whether in industrial, medical, or research settings, the IMHS40090 delivers performance and versatility that stand out in the imaging landscape.
Top Page Image Contents