Image IMHS63100 user manual Draining the Pumps, Winter USE and Care, Replacing the Light Bulb

Page 15

To drain the hydrotherapy spa, follow the steps below:

1.Using the console, adjust the temperature to the lowest setting.

2.Shut off the power to the spa, at the circuit breaker or GFCI.

3.Remove the pump access panel from the spa.

4.Remove the end of the drain hose from the spa. Remove the cap and attach a garden hose to the drain hose.

 

Valve

Drain

Cap

Knob

Hose

5.Open the valve by turning the valve knob. The water will begin to drain.

6.When the spa is empty, close the valve and remove the garden hose. Re-attach the cap and return the drain hose to the clip inside the spa.

7.Re-attach the access panel.

8.Refill the spa and treat the water with chemicals (see pages 10 and 14).

DRAINING THE PUMPS

After the hydrotherapy

 

spa is drained (see

 

DRAINING THE

 

HYDROTHERAPY SPA

 

on page 14), the jet

 

pumps should also be

 

drained if the

 

hydrotherapy spa will

Drain Plug

be stored for more than

 

thirty days or if it may

 

be exposed to freezing temperatures.

 

Turn off the power to the spa. To drain the jet pumps, remove the access panel from the spa unit (see

ATTACHING AND REMOVING THE ACCESS PANEL on page 14). Locate the jet pumps inside the spa unit. Remove the drain plugs from the jet pumps and allow all water to drain out. Replace the drain plugs.

WINTER USE AND CARE

The hydrotherapy spa is designed for year-round use. If you decide to store the spa for the winter, store it in a warm, dry location. Follow the steps below to winter- ize the spa.

1.Make sure the power to the spa is turned off.

2.Drain the spa (see DRAINING THE HYDROTHER- APY SPA on the previous page and this page).

3.Remove all remaining water from the spa shell. Dry the spa shell with towels.

4.Set the air control to the lowest setting. Use a wet/dry vacuum to pull any remaining water from the system. To do this, place the vacuum nozzle over each jet, starting with the highest jet and fin- ishing with the lowest jet.

5.Set the air control on the console to the highest setting and repeat step 3.

6.Drain the pumps (see DRAINING THE PUMPS on this page). Once the water is drained from the pumps, place the vacuum nozzle over the drainage hole in the pumps and vacuum any additional water from the pumps. Note: For additional pro- tection, remove the pump/motors from the spa and store them in a climate-controlled room.

7.Clean the spa shell (see page 13).

8.Clean the filter (see page 13).

9.A licensed, qualified electrician should disconnect the power from the 240V power source.

10. Re-attach the access panel and the spa cover.

REPLACING THE LIGHT BULB

If the underwater light burns out, you will need to remove the pump access panel to replace it (see

ATTACHING AND REMOVING THE ACCESS PANEL on page 14). Make sure the spa power is turned off. Next, locate the light housing. Turn the light housing counterclockwise and remove it from the spa shell.

Light Housing

Light

 

Bulb

Light

Housing

To replace the light bulb, pull the old light bulb out of the housing and insert a new light bulb. Re-attach the light housing to the spa shell. Re-attach the access panel to the spa.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Customer HOT Line Model No. IMHS63100 Serial NoPosting the Warning Sign Table of ContentsRead and Follow ALL Instructions Important Safety InstructionsPage Page Before You Begin If you set up the hydrotherapy spa inside If you set up the hydrotherapy spa outsideChoosing a Location for the Hydrotherapy Spa Careful not to damage the spa shell AssemblyPage Starting the Hydrotherapy SPA Using the Hydrotherapy SpaWiring the Hydrotherapy SPA Testing and Treating the WaterSpa Shell Diagram Using the Controls Maintenance Draining the Hydrotherapy SPA Attaching and Removing the Access PanelWater Chemistry Maintaining the Proper PH BalanceDraining the Pumps Winter USE and CareReplacing the Light Bulb Trouble-shooting Symptom the Console Displays ONE Symptom the Console Displays the Words Cool or ICEKey No. Qty Description Part List-Model No. IMHS63100Exploded Drawing-Model No. IMHS63100 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

IMHS63100 specifications

The Image IMHS63100 represents a significant advancement in the world of imaging technology, catering specifically to high-performance applications in various industries. It is designed to meet the stringent requirements of professional imaging, offering a blend of exceptional features and cutting-edge technologies.

At its core, the IMHS63100 is equipped with a high-resolution sensor that delivers stunning image clarity and detail. With a pixel count that exceeds 30 megapixels, it enables users to capture images that are not only sharp but also rich in color depth and dynamic range. This high resolution is essential for applications such as medical imaging, industrial inspection, and scientific research, where precision and detail are paramount.

One of the standout characteristics of the IMHS63100 is its advanced noise reduction capabilities. Utilizing sophisticated algorithms, the device minimizes noise without sacrificing image quality, ensuring that even in low-light conditions, the images remain clear and usable. This feature is particularly beneficial for users working in environments with fluctuating lighting, allowing for consistent performance and reliability.

In terms of connectivity, the IMHS63100 supports multiple interfaces, including USB 3.0 and GigE, which streamline the integration process into existing systems. This versatility allows it to be used seamlessly with various software platforms, enhancing the overall workflow efficiency. Additionally, the camera supports Power over Ethernet (PoE), simplifying installation and reducing cable clutter in complex setups.

The IMHS63100 is also designed with robust build quality in mind. Its durable casing makes it suitable for demanding environments, ensuring longevity and reliable operation in fields such as manufacturing and research laboratories. The camera's compact form factor further enhances its versatility, allowing it to be easily mounted in tight spaces without compromising performance.

Furthermore, the device incorporates intelligent features such as automated image processing and real-time analytics, enabling users to optimize workflows and make informed decisions based on accurate data. With these capabilities, the IMHS63100 is not just an imaging device but a comprehensive solution tailored to meet the nuanced demands of various high-performance applications.

In conclusion, the Image IMHS63100 is a powerful imaging system that combines high-resolution capabilities, advanced noise reduction, versatile connectivity options, and robust design to meet the needs of professional users. Whether in medical, industrial, or research applications, it stands as a reliable choice for those seeking superior image quality and performance.
Top Page Image Contents