Image IMHS63100 user manual

Page 9

3. Refer to the drawing on page 6 and locate the

3

 

 

heater access opening.

 

 

Gate

 

 

 

 

 

Locate the two indicated gate valves inside the

Valve

Collar

 

 

 

heater access opening. Make sure that the gate

 

 

 

 

 

valves are open and that the locking clips are

 

 

 

snapped onto the stems of the gate valves (refer to

 

 

 

the inset drawing in step 2 on page 8).

 

 

 

Make sure that the four indicated collars are tight-

 

Collar

Gate

ened.

Collar

 

Valve

Refer to step 1. Re-attach the heater Access Panel

 

Electronics Pack

 

 

 

 

(5) to the spa with the four 1/4” x 1 1/2” Machine

 

 

 

Screws (7).

 

 

 

4. The hydrotherapy spa operates on a 240 volt power source and must be wired directly to a 240 volt ground

fault circuit interrupter (GFCI) installed in your home. This procedure must be performed by a qualified

electrician. A wiring diagram is found on the inside of the electronics pack as a reference. Under no

circumstances should the spa be wired by someone other than a qualified electrician. Before you

have the spa wired, make sure that it is in the position you want, and that it can be easily serviced, if needed.

5.After a qualified electrician has wired the spa to a 240 volt power source, refer to the inset drawing. Set the Filter (16) into the filter housing. Next, screw the Filter Cover (8) into the filter housing until it is fully seated.

Remove the two warning decals (not shown) from the spa shell. Using a damp cloth, wipe the spa shell clean. Before filling the spa, make sure that it is in the desired position and that there is room to easily service the spa. Once the spa is filled, it will have to be drained before it can be moved.

Using a garden hose or other clean water source, begin filling spa. Do not use soft water. The spa may be filled with cold water; however, if warm or hot water is used, the spa will be ready for use sooner. Fill the spa until the water is at the level shown at the right. Do not overfill the spa.

6.Pull down one of the straps on the Spa Cover (11) and hold the Buckle (30) against one of the WeatherWood™ panels on the spa. (Note: To posi- tion the Buckle correctly, have a second person hold the strap on the opposite side of the Spa Cover tight.) The Spa Cover must be tight. Do not place the Buckle over the grooves between the WeatherWood™ panels. Refer to the inset drawing. Remove the latch from the Buckle (30). Attach the Buckle to the WeatherWood™ panel with two #4 x 3/4” Screws (31).

Attach the other five Buckles (30) to the WeatherWood™ panels in the same way.

Remove the Spa Cover (11) from the spa.

5

 

8

 

 

16

 

Fill to Here

Filter

 

 

Filter

 

Housing

Housing

 

 

6

 

 

11

 

Strap

 

 

 

 

Latch

 

 

30

 

 

31

 

 

Strap

 

 

30

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Customer HOT Line Model No. IMHS63100 Serial NoPosting the Warning Sign Table of ContentsRead and Follow ALL Instructions Important Safety InstructionsPage Page Before You Begin If you set up the hydrotherapy spa inside If you set up the hydrotherapy spa outsideChoosing a Location for the Hydrotherapy Spa Careful not to damage the spa shell AssemblyPage Wiring the Hydrotherapy SPA Using the Hydrotherapy SpaTesting and Treating the Water Starting the Hydrotherapy SPASpa Shell Diagram Using the Controls Maintenance Water Chemistry Attaching and Removing the Access PanelMaintaining the Proper PH Balance Draining the Hydrotherapy SPADraining the Pumps Winter USE and CareReplacing the Light Bulb Trouble-shooting Symptom the Console Displays ONE Symptom the Console Displays the Words Cool or ICEKey No. Qty Description Part List-Model No. IMHS63100Exploded Drawing-Model No. IMHS63100 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

IMHS63100 specifications

The Image IMHS63100 represents a significant advancement in the world of imaging technology, catering specifically to high-performance applications in various industries. It is designed to meet the stringent requirements of professional imaging, offering a blend of exceptional features and cutting-edge technologies.

At its core, the IMHS63100 is equipped with a high-resolution sensor that delivers stunning image clarity and detail. With a pixel count that exceeds 30 megapixels, it enables users to capture images that are not only sharp but also rich in color depth and dynamic range. This high resolution is essential for applications such as medical imaging, industrial inspection, and scientific research, where precision and detail are paramount.

One of the standout characteristics of the IMHS63100 is its advanced noise reduction capabilities. Utilizing sophisticated algorithms, the device minimizes noise without sacrificing image quality, ensuring that even in low-light conditions, the images remain clear and usable. This feature is particularly beneficial for users working in environments with fluctuating lighting, allowing for consistent performance and reliability.

In terms of connectivity, the IMHS63100 supports multiple interfaces, including USB 3.0 and GigE, which streamline the integration process into existing systems. This versatility allows it to be used seamlessly with various software platforms, enhancing the overall workflow efficiency. Additionally, the camera supports Power over Ethernet (PoE), simplifying installation and reducing cable clutter in complex setups.

The IMHS63100 is also designed with robust build quality in mind. Its durable casing makes it suitable for demanding environments, ensuring longevity and reliable operation in fields such as manufacturing and research laboratories. The camera's compact form factor further enhances its versatility, allowing it to be easily mounted in tight spaces without compromising performance.

Furthermore, the device incorporates intelligent features such as automated image processing and real-time analytics, enabling users to optimize workflows and make informed decisions based on accurate data. With these capabilities, the IMHS63100 is not just an imaging device but a comprehensive solution tailored to meet the nuanced demands of various high-performance applications.

In conclusion, the Image IMHS63100 is a powerful imaging system that combines high-resolution capabilities, advanced noise reduction, versatile connectivity options, and robust design to meet the needs of professional users. Whether in medical, industrial, or research applications, it stands as a reliable choice for those seeking superior image quality and performance.
Top Page Image Contents