Indicators and Controls, Indicadores y Controles

Indicators and Controls

Power Indicator ( )

The power indicator provides a visual indication that the amplifier is turned on.

Input Level Control (LEVEL)

The input level control matches the output of your radio to the input of the amplifier. After the installation is complete, make sure the input level control on the amplifier is turned down all the way (counter-clockwise or all the way to the left). Play a tape or CD (make sure bass and treble settings or EQ are flat) and turn the volume up slowly until you just start to hear distortion. Back the volume down just a bit. On the amplifier, slowly turn up the input level control (clockwise or to the right) until you just start to hear distortion, then back it down a bit. Now your radio and amplifier levels are matched.

Bass Boost (BASS EQ)

The Bass Boost is continuously adjustable from 0 to +18dB @ 45Hz. Adjusting the Bass Boost level allows different subwoofer/ enclosure combinations to be equalized. Use this control to increase the level of low bass available from your subwoofer/ enclosure combination. Ported and Band Pass enclosures should be limited to about +6dB to +9dB of boost. Sealed enclosures should be able to accept the full +18dB of boost, if necessary. The full +18dB of boost should be reserved for special applications since improper use of the Bass Boost could damage your subwoofers at high volumes.

Indicadores y Controles

Indicador de Energía ( )

Proporciona una indicación visual de que el amplificador está encendido.

Nivel de Entrada (LEVEL)

El control de nivel de entrada iguala la salida de su radio con la entrada del amplificador. Después que la instalación se complete, asegúrese de que el control de nivel de entrada en el amplificador esté girado completamente hacia la izquierda (en el sentido contrario a las agujas del reloj). Ponga un caset o CD (asegúrese que los controles de graves y agudos o EQ estén planos también) y suba el volumen lentamente hasta que apenas empiece a oír una distorsión. Retroceda un poco el volumen. En el amplificador, lentamente suba el control de nivel de entrada girándolo hacia la derecha (en el sentido de las agujas del reloj ) hasta que apenas empiece a oír una distorsión, y retrocédalo un poco. Ahora los niveles están igualados.

Alza Baja (BASS EQ)

La característica del alza baja es continuamente ajustable a partir de la 0 a +18dB @ 45Hz. que ajusta el nivel del alza baja permite que diversas combinaciones del subwoofer sean igualadas. Utilice este control para aumentar el nivel del bajo bajo disponible de su combinación del subwoofer. Los recintos virado hacia el lado de babor y de la venda del paso se deben limitar alrededor a +6db a +9dB del alza. Los recintos sellados deben poder aceptar el +18dB lleno del alza, en caso de necesidad. El +18dB lleno del alza debe ser reservado para los usos especiales porque el uso erróneo del alza baja podría dañar sus subwoofers en los altos volúmenes.

JPA1150M/JPA1300M

Indicateurs et contrôles

Indicateur de puissance ( )

S'allume quand l'amplificateur est en fonction.

Niveau (LEVEL)

Le commande de niveau d'entrée egalise la sortie de votre radio avec l'entrée du amplificateur Après que l'installation se compléte, vous vous assurez que le commande de niveau d'entrée dans l'amplificateur est tourné complétement vers la gauche. Vous mettez une cassette ou un disque compact (vous vous assurez que les contrôles de bas et aigus sons ou EQ sont aussi plats) et augmentez le volume lentement jusqu'à qu' à peine vous commencez à entendre une distorsion. Vous disminuez un peu le volumen. Dans l'amplificateur, augmentez lentement le contrôl de niveau d'entrée (dans le sens des aiguilles de l'horloge ou vers la droite) jusqu'à qu'à peine vous commencez à entendre une distorsion, et vous disminuez un peu. Maintenant les niveaux de votre radio et votre amplificateur sont égalés.

Poussée basse (BASS EQ)

Le dispositif de poussée basse est sans interruption réglable de 0 à +18dB @ 45Hz. ajustant le niveau de la poussée basse permet à différentes combinaisons de subwoofer d'être égalisées. Employez cette commande pour augmenter le niveau de la basse basse disponible de votre combinaison de subwoofer. Des clôtures mise en communication et de bande de passage devraient être limitées environ à +6dB à +9dB de poussée. Les clôtures scellées devraient pouvoir accepter le plein +18dB de la poussée, au besoin. Le plein +18dB de la poussée devrait être réservé pour des applications spéciales parce que l'abus de la poussée basse pourrait endommager vos subwoofers aux volumes élevés.!

	Indicators and Controls / Indicadores y Controles / Indicateurs et Contrôles
HI-INPUT	INPUT	LEVEL		BASS EQ		LPF		X-OVER		OUTPUT	REMOTE STAND-BY
			1.2		6	90
	3		0.6	3	10	55	130
	L										L
											L
		8V	0.3V	0dB	18dB	40Hz	250Hz	LPF	FULL
	R										R
											R
						10

JPA1300M, JPA1150M specifications

The Jensen JPA1150M and JPA1300M are powerful and reliable amplifiers designed for a variety of audio applications, ranging from home theater systems to professional sound reinforcement setups. Both models are known for their robust construction, advanced technology, and exceptional performance, making them a popular choice among audiophiles and professionals alike.

The Jensen JPA1150M is a compact yet powerful amplifier that delivers up to 150 watts of RMS power per channel at 8 ohms, with a peak output of up to 300 watts. This model is engineered with a high-efficiency Class D amplifier topology, which not only reduces power consumption but also minimizes heat generation. This feature is particularly beneficial in applications where space is limited, as it allows for a more compact design without sacrificing performance. The JPA1150M is equipped with advanced thermal protection circuitry, ensuring reliable operation even under demanding conditions.

On the other hand, the Jensen JPA1300M steps up the game with a robust output of 300 watts RMS per channel at 8 ohms, with a peak output of 600 watts. This amplifier is ideal for users who require a higher power output for larger venues or more demanding audio setups. Like its counterpart, the JPA1300M utilizes advanced Class D technology for superior sound quality and efficiency. This model also features dual-channel operation, allowing it to drive multiple speakers with ease.

One of the standout features of both amplifiers is their extensive connectivity options. They come equipped with XLR, 1/4-inch TRS, and RCA inputs, providing flexibility for various input sources. The output options include binding posts and speakon connectors, making it easy to connect to a wide range of speakers and PA systems.

In terms of sound quality, both amplifiers are designed to deliver transparent audio with low distortion and high dynamic range. They feature adjustable gain controls and a signal LED indicator, allowing users to easily monitor performance and make necessary adjustments on the fly.

Overall, the Jensen JPA1150M and JPA1300M stand out in the market for their power output, efficiency, and versatility. Whether you're a musician, sound engineer, or home audio enthusiast, these amplifiers offer an exceptional solution for all your audio amplification needs. With reliable performance and easy-to-use features, they are a worthy investment for anyone looking to enhance their sound experience.