Uniden GH 300 Maintenance, Pressure Relief Procedure, After the First 20 Hours of Operation

Page 7

Maintenance

Maintenance

Pressure Relief Procedure

The system pressure must be manually relieved to pre- vent the system from starting or spraying accidentally. Fluid under high pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, fol- low the Pressure Relief Procedure whenever you:

are instructed to relieve the pressure,

stop spraying,

check or service any of the system equipment,

or install or clean the spray tip.

1.Lock gun trigger safety.

2.Turn engine ON/OFF switch to OFF.

3.Move pump valve to OFF (down) and turn pressure control knob fully counter clockwise.

4.Unlock trigger safety. Hold metal part of gun firmly to side of grounded metal pail, and trigger gun to relieve pressure.

5.Lock gun trigger safety.

6.Open pressure drain valve. Leave valve open until ready to spray again.

If you suspect that the spray tip or hose is completely clogged, or that pressure has not been fully relieved after following the steps above, VERY SLOWLY loosen tip guard retaining nut or hose end coupling to relieve pressure gradually, then loosen completely. Now clear tip or hose.

CAUTION

For detailed engine maintenance and specifications, refer to separate Honda Engines Owner's Manual, supplied.

DAILY: Check engine oil level and fill as necessary.

DAILY: Check hydraulic oil level and fill as necessary.

DAILY: Check hose for wear and damage.

DAILY: Check gun safety for proper operation.

DAILY: Check and fill the gas tank.

DAILY: Check that displacement pump is tight.

DAILY: Check level of Throat Seal Liquid (TSL) in dis- placement pump packing nut. Fill nut, if necessary. Keep TSL in nut to help prevent fluid buildup on piston rod and premature wear of packings and pump corrosion.

AFTER THE FIRST 20 HOURS OF OPERATION:

Drain engine oil and refill with clean oil. Reference Honda Engines Owner's Manual for correct oil viscosity.

WEEKLY: Remove engine air filter cover and clean ele- ment. Replace element, if necessary. If operating in an unusually dusty environment: check filter daily and replace, if necessary.

Replacement elements can be purchased from your local HONDA dealer.

WEEKLY/DAILY: Remove any debris or media from hydraulic rod.

AFTER EACH 100 HOURS OF OPERATION:

Change engine oil. Reference Honda Engines Owner's Manual for correct oil viscosity.

SEMI-ANNUALLY:

Check belt wear, page 10; replace if necessary.

YEARLY OR 2000 HOURS:

Replace hydraulic oil and filter with Graco hydraulic oil 169236 (5 gallon/20 liter) or 207428 (1 gallon/3.8 liter) and filter 116909.

Replace belt.

SPARK PLUG: Use only BPR6ES (NGK) or W20EPR-U (NIPPONDENSO) plug. Gap plug to 0.028 to 0.031 in. (0.7 to 0.8 mm). Use spark plug wrench when installing and removing plug.

DAILY: Check pressure drain valve for proper operation.

311797B

7

Image 7
Contents GH 130, GH GH 230, GH Hydraulic Sprayers Electric Motor Kit Options ModelsElectric Shock Hazard Fire and Explosion HazardSkin Injection Hazard Pressurized Equipment HazardSuction Hazard Moving Parts HazardEquipment Misuse Hazard Pressurized Aluminum Parts HazardItem No Component Component IdentificationGeneral Repair Information SAE O-Ring InstallationGrounding After Each 100 Hours of Operation SEMI-ANNUALLY MaintenancePressure Relief Procedure After the First 20 Hours of OperationProblem Cause Solution Troubleshooting311797B Hydraulic Pump InstallationRemoval 227 266221 225 226 173 117 276 Fan Belt Engine Flying Parts Hazard Hydraulic Motor Rebuild263 Hydraulic Oil/Filter Change Figures Displacement PumpDisplacement Pump ProConnect Support pump with your hand before opening t-handle Install pin 311797B All Sprayers PartsPart Description Qty Parts List All SprayersParts Drawing Engines WASHER, GH300 Parts Drawing All Sprayers Plug Parts Drawing All Sprayers GH200/230/300 STRAP,TIE 267 MANIFOLD, GH200 Parts ListGH 230 & 300 Sprayers with Spray Gun and Hoses GH 130 & 200 Sprayers with Spray Gun and HosesSound Levels DimensionsFor Graco Canada Customers Graco Standard Warranty

GH 300, GH 130, GH 200, GH 230 specifications

Uniden is a well-known brand in the realm of communication devices, and their GH series offers an array of headsets that combine cutting-edge technology with user-friendly features. The GH 200, GH 300, GH 130, and GH 230 are notable models that cater to diverse user needs, offering excellent sound quality, comfort, and robust connectivity.

The Uniden GH 200 is designed for those who prioritize comfort and clarity. It features a lightweight build with cushioned ear pads, ensuring extended wear without discomfort. This model boasts advanced noise-cancellation technology, which effectively minimizes background noise to enhance audio quality during calls. The GH 200 also supports Bluetooth connectivity, allowing users to connect seamlessly with smartphones and other devices, making it a versatile choice for both personal and professional use.

Moving up the line, the Uniden GH 300 provides a more advanced feature set. In addition to superior audio quality and noise-cancellation capabilities, the GH 300 comes with a long-lasting battery life, offering several hours of operation on a single charge. This model is equipped with intuitive touch controls, allowing users to easily manage calls and music playback without fumbling with their connected device. With its sturdy construction and sleek design, the GH 300 is a durable option suitable for various environments, from office settings to outdoor activities.

The Uniden GH 130 is tailored for users seeking a budget-friendly yet functional headset. It includes essential features such as clear sound and a comfortable fit. Although it may not have all the bells and whistles of its pricier counterparts, the GH 130 still delivers a reliable performance for everyday use. This model is particularly popular among students and professionals who need a straightforward communication tool without compromising on quality.

Finally, the Uniden GH 230 strikes a balance between performance and affordability. It incorporates a mix of the standout features found in both the GH 200 and GH 300, offering good audio clarity along with moderate noise-cancellation capabilities. The GH 230 is equipped with adjustable headbands and a flexible microphone, catering to users who appreciate customizability. This model also supports both wired and wireless connectivity, providing versatility in connection options.

In conclusion, the Uniden GH series, encompassing the GH 200, GH 300, GH 130, and GH 230, offers a variety of headsets that meet the needs of different users. With a combination of comfort, audio quality, and innovative technologies, each model presents unique features tailored to enhance the communication experience.