Univex 358.799370 manual Plug willfit only one way in a polarized, Eords To heat, oil, water,or

Page 3

damporwatlocationsoraroundswim-

ruing pools, hot tube, etc. Do not ex- pose to bnow, rain, or water. Do not

handle extension cord plugorunitwith wet hands,

• To reduce the risk of elfictrioalshock,

marked as suitable for outdoor ap- pliancas having electrical rating not

less than the rating of the unit. The use extension cords specifically cord must be marked with the suffix

"W-A"(in Canada, "W"). Use a polar- ized cord. Make sure your extension cord Is in good condition. If damaged,

have the co.rd replaced. An under- sized extension cord willcause a drop

in line voltage r..asuitingin lossof pow- er and overheating. Ifin doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. (NOTE: The correct size to be used depending onthe cord length isshown in this manual).

•To reduce the risk of electricalshock,

this equ'_menthas a polarized plug

(onebisdeiswiderthantheother)Th._

plug willfit only one way in a polarized

ouUetof the extensionco.rd.Ensureyou have a polarized exten_on cord. The plugofthe polarized extensioncord will fd intotheoutletonlyone wayoIfthe plug does notfit fullyinthe o_et, reversethe plug.If it stilldoes notfit, contacta quali- fiedelectricianto installproperoutlet.Do not changethe plug in any way.

•Inspect the insulation and connectors on the unit and extension cord before each use. If there is any damage, do not use until damage is repaired by your Sears Service Center. Do not pull or carry by cord; do not use cord as a handle, close a door on cord, or pull cord around sharp edges or cor- ners..,_eep cord away from heated surfaces. Do not unplug by pulling on

cord. To unplug, grasp_the.plug, not the cord.

•To reduce the possibility of the exten- sion cord disconnecting from the unit

dudng operation, tie the extension cord to the unitand connect as shown in this manual.

•Don'tusethe unitif the switchdoss not

turn the uniton and off properly. Have

the unit repaired by your Sears Ser- vice Center.

•Keep the extension cord clear of oper- ator and obstacles at all times. Do not

e_-eords

to heat, oil, 'water,or

sharp edges.

•Avoid any body contactwith any

grounded conductor, such as metal fences, or pipes, to avoidthe poesibil-

ityof electricshock. Don'thandle plug or unitwith wet hands.

-Do notusewith damagedcord or plug.

been dropped, damaged, left out- doors, or dropped into water, return it

to )/our Sears Service Center for re- ,If unit is not working as it should, has

pair.

Ground Fault Cimuit Interrupter (GFCI) protectionshould be provided on the circuit or outlet to be used for

this unit. Receptacles are available having built-in GFCI protection and

may be usedfor this measure of safe-

ty.

•Keep others including children, ani- mals, bystanders, and helpers a mini- mumof 50 feet (15 meters)away. Stop the motor immediately if you are ap- proached. Do not allow the unitto be

used as a toy.

DOUBLE INSULATION CONSTRUCTIONThis unit is Double

Insulatedto help protect against elec- tdcshock. Double insulation construc-

tion consists of two separate "layers" of electrical insulation instead of

grounding.Tools and appliances built with a double insulationsystem are

not intended to he grounded. No grounding means is provided on th_s

unit,norshould a means ofgrounding be added to this unit. As a result, the

extension.c?rdusedwithyour unitcan be plugged into any standard 120 volt eleotdc_ outleL Safety precautions

must .beobservedwhen operatingany electrical tool. The double insulation

system only I?rOvidesadded protec-

tion againstinjuryresultingfrom an in. temal electrical insulation failure.

All electrical rep.airsto this unit,includ- ing hous,ng,switch, motor, etc., must be diagno._l and rep_,red by quail- tied service personnel. Repis_.ment parts for a double insulated appliance must be identical to the paris they re-

place. A double insulated appliance is marked withthe words DOUBLEINSU-

LATIONor DOUBLEINSULATED.The

symbol [] (square within a _uare) may alsobe marked on .._eappl_mce.

Failure to have the unit repaired by

Sears sense personnel can cause the double insulation constructionto

become ineffective and result in sed- ous injury.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Crrftsmrn Electrical Safety Operator SafetyTo Reduce the Risk of Elec Plug willfit only one way in a polarized Eords To heat, oil, water,orBecome ineffective and result in sed- ous injury UNIT/MAINTENANCESAFETY Blower SafetyStop the motor and disconnect Standards AssemblyRemove the Inlet Restrictor Attaching the Vacuum TubesAttach the Collection BAG VCLTSi25 FT HOW to Convert Unit from Vacuum USE to Blower USEMinimumwire Gauge Recommendations Bag is kinked, the unit will not oper- ate properlyKnow Your Electric Blower Operating TipsStopping Your Unit When to Perform Before each use After each useBefore Each USE Check for Loose Fasteners and Parts Blower Storage On/Off Switch- Ensure switchfuncAfter Each USE Clean Unit & Labels HOW to Remove AN Object from the AIR IntakeTroubleshooting Chart Page Part

358.799370, 79937 specifications

Univex 358.799370,79937 is a revolutionary piece of equipment designed to meet the diverse needs of professionals in various industries. This versatile machine combines cutting-edge technology with user-friendly features, making it a top choice for those looking to enhance productivity and efficiency in their operations.

One of the standout features of the Univex 358.799370,79937 is its advanced control system. The intuitive interface allows users to easily navigate through various settings, enabling quick adjustments to suit different tasks. This system not only simplifies operation but also enhances accuracy, ensuring that every output meets the highest standards.

The machine is equipped with a robust motor that delivers impressive power while maintaining energy efficiency. This dual capability means that users can handle heavy workloads without worrying about excessive power consumption. Additionally, the motor is designed for longevity, reducing the need for frequent maintenance and providing a reliable solution for long-term operations.

Another significant characteristic of the Univex 358.799370,79937 is its modular design. This allows for easy upgrades and adjustments based on changing needs, making the machine a flexible investment. Users can expand its capabilities with various attachments and components, creating a tailored approach to specific applications.

Safety has also been a top priority in the design of the Univex 358.799370,79937. The machine features multiple safety mechanisms to protect users from potential hazards, ensuring a secure working environment. The durable construction of the equipment is designed to withstand rigorous use while minimizing the risk of breakdowns.

In terms of performance, the Univex 358.799370,79937 excels in delivering consistent results across a wide range of applications. Whether it’s for food processing, manufacturing, or other industrial uses, this machine is engineered to provide exceptional output quality without compromising on speed.

Finally, the support services offered alongside the Univex 358.799370,79937 enhance its appeal. Comprehensive training, an extensive warranty, and responsive customer service ensure that users can maximize their investment and minimize downtime.

In summary, the Univex 358.799370,79937 combines advanced technology, user-friendly operation, and robust performance, making it an essential tool for professionals seeking reliability and efficiency in their operations.
Top Page Image Contents