Ryobi Outdoor PBC3046E, RY70105 manual Fuel CAP, Spark Plug, Storage 1 Month or Longer

Page 19

MAINTENANCE

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, check valve may be faulty or filter clogged. Replace fuel cap if required.

SPARK PLUG

This engine uses a Champion RCJ-6Y with 0,63 mm (.025 in.) electrode gap. Use an exact replacement and replace annually.

STORAGE (1 MONTH OR LONGER)

1.Drain all fuel from tank into a container approved for gasoline. Run engine until it stops.

2.Clean all foreign material from the trimmer. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

3.Cover the blade with the blade protector before storing the unit, or during transportation.

4.Abide by all ISO and local regulations for the safe storage and handling of gasoline. Excess fuel should be used up in other 2-cycle engine powered equipment.

19

Image 19
Contents Operators Manual Safety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation SymbolsVibration level racing Technical DataPacking List for Owners KIT FeaturesUnpacking InstructionsAttaching the Storage Hanger AssemblyAttaching the Power Head to the Trimmer Attachment Removing the Attachment from the Power HeadAttaching the Handle Muffler Guard Attaching the Shoulder StrapConverting from String Trimmer to Brushcutter Drive Connector Spool Retainer String HeadBlade Guard Grass DeflectorRemoving the Blade Installing the BladeInstalling the String Head Converting from Brushcutter to String TrimmerFuel and Refueling OperationOperating the Trimmer Cutting Tips Advancing the StringGrass Deflector Line Trimming CUT- OFF Blade TRI-ARC Blade Operating the BrushcutterCutting Technique Blade To Start a Warm Engine Ignition SwitchStarting and Stopping To Start a Cold Engine See Figures 18 Maintenance Spool Replacement EZ Line TAP Advance System NEW Prewound SpoolArrows on Spool Anchor Hole First String String ReplacementBlade Protector SpringSee Figures 25 Cleaning the Exhaust Port and MufflerReplacing and Cleaning AIR Filter Spark ArrestorSpark Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Idle Speed Screw Needle EC Declaration of Conformity WarrantySafety Directive Guarantee Statement Rtsa / Rtuk / RTGPage 983000-202