JBL Professional G2 manual Cables and Connectors, XLR/F to XLR/M Microphone Cable

Cables and Connectors

XLR/F to XLR/M Microphone Cable	• The standard cable for interconnection of microphone
	and line level signal in professional audio systems.
	• Microphone to mixer
	• Microphone to EON10 G2 INPUT 1
	• Audio mixer to EON10 G2 INPUT 1
	• “Daisy chaining” EON10 G2 speaker systems
TRS* (Balanced) 1/4” Phone to XLR/M	• For connecting balanced devices with 1/4” connector to
	the EON speaker
XLR input. TS (Unbalanced) 1/4” Phone XLR/M	• Connects devices such as electronic instruments and
	some mixers to an XLR input. This cable may be used to
	connect an unbalanced source to a balanced input but
	the connection will be unbalanced.
XLR/M to RCA (phono) cable	• Connects consumer audio products and some DJ mixer
	outputs to professional audio equipment inputs.
TS (Unbalanced) 1/4” Phone to RCA (phono) cable	• Connects outputs of consumer audioequipment to
	unbalanced line inputs of EON10 G2 and many mixers.
	• Connects unbalanced line outputs of many mixers to the
	inputs of consumer audio recorder.
TRS 1/4” Phone to dual 1/4” Phone	• Splits a stereo output into separate left/right signals.
	• Connects stereo electric guitar to two unbalanced
	audio inputs.
	• Connects a headphone output to two unbalanced
	audio inputs.
	• Change to a TRS mini-phone to connect to the output of
	portable CD players and computer sound cards to a
	mixer or powered speakers.
	• Also used to connect signal processors to the “insert” of
	many mixing consoles.
TRS 1/8” Phone to dual 1/4” Phone	• Splits a stereo output from a portable audio device (CD,
	R-DAT, Mini-Disc, etc.) or computer sound card into
	separate left/right signals that can be fed to 1/4” inputs
	of professional audio equipment.
TRS 1/8” Phone to dual RCA	• Splits a stereo output from a portable audio device (CD,
	R-DAT, Mini-Disc, etc.) or computer sound card into
	separate left/right signals that can be fed into RCA inputs
	of audio equipment.
1/4” Phone to RCA (phono) Adapter	• Used to connect outputs of consumer audio products to
	the unbalanced inputs of many pro-audio devices.
TRS 1/4” Phone to 1/8” Mini-Phone Adapter	• Used to connect headphones with Mini-Phone cables to
	1/4” headphone jacks.
	• Adapts the output of portable audio players and
	computers to INPUT 2 & 3 on the EON10 G2.

*TRS = Tip Ring Sleeve indicating that the connector can conduct two audio channels (via the Tip and the Ring) and a ground (via the Sleeve). TRS connectors may be used for a single channel of balanced audio or two channels of unbalanced audio.

18