JBL Professional G2 manual Quick Start, Power UP Procedure

Page 8

Quick Start

1.Refer to the “Basic Sound Reinforcement System with Stage Monitors” diagram on page 12

2.Turn the INPUT 1 and INPUT 2 & 3 controls fully counter clockwise.

3.Set the MIC/LINE switch.

•If a microphone will be connected directly to INPUT 1, set the MIC/LINE switch to the MIC position (depressed). The MIC LED will illuminate when power is turned on.

•If a mixer, CD player, cassette tape, or electronic musical instrument (the “source”) will be connected directly to INPUT 1, set the MIC/LINE switch to the LINE position (disengaged). The MIC LED will not illuminate when power is turned on.

4.Plug the power cable into a properly grounded 3-wire AC power.

5.Plug the XLR cable from the mixer or microphone into the INPUT 1 connector.

6.Connect unbalanced sources (if used) to the INPUT 2 & 3 connector.

7.POWER UP PROCEDURE

First, switch on the power to the mixer, audio sources, or musical instruments that are feeding your EON10 G2.

•Next, turn on the power switch (the front panel power indicator will illuminate).

•Reverse this process when shutting down your system. This will avoid disturbing thumps from the speaker as sources power on/off.

8.SET VOLUME

•If you are using an audio-mixing console, refer to the manufacturer’s instructions to properly set gain structure (see the “Gain Structure” section on page 16).

•Turn up your sources to the level that will be used in performance and talk, sing or play into the system.

•Bring the INPUT 1 control up (clockwise) until the desired volume has been reached. If you are using a micphone, turn the INPUT 1 control up slowly to avoid feedback.

•If you are using the INPUT 2 & 3 inputs, bring the INPUT 2 & 3 controls up to the desired volume.

9.CHECK THE PEAK LED - The PEAK indicator flashes when the loudspeaker’s on-board amplifiers are approaching maximum output. Occasional flashes are normal for very loud operation. However, if the PEAK LED stays illuminated, the sound will be distorted and it is an indication that more speakers or a lower performance volume may be required for your specific application.

CONTROLS AND CONNECTIONS

The audio section of the EON10 G2 includes powerful features that enhance the flexibility of your speakers.

MIX LOOP

O

U

T

P

U

T

1

I

N P U T

2 & 3

2

3

MIC LINE 1

R-PEAK

G-SIGNAL

Controls

INPUT 1

Adjusts the level of INPUT 1. Use this control to match the input sensitivity of the EON10 G2 to the output level of the mixer, microphone, or instrument connected to INPUT 1. It is a common miscon- ception that this control changes the power of a system. Your EON10 G2 will produce its rated output power no matter where this control is set. The INPUT 1 control determines how much signal is required at the input in order to drive the system to full output.

INPUT 2 & 3

This control adjusts the level of the inputs connected to INPUT 2 & 3.

2 & 3

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents EON10 G2 User Guide Page Contents Package Contents WelcomeFloor and Table Top Application Placement PrecautionsElectrical Safety Features SpecificationsAbout The EON10 G2 ApplicationsFrequency Reponse Available Accessories Block DiagramPower UP Procedure Quick StartConnectors Indicators Application Examples One Piece PA SystemBasic Sound Reinforcement System With Stage Monitors DJ or Sound Reinforcement System with Eonsub G2Troubleshooting DJ System with Passive SubwoofersAudio signal Improper A/C ground or faulty Reference Gain StructureLoudspeaker Placement and Mounting Connections Balanced and UnbalancedCables and Connectors XLR/F to XLR/M Microphone CablePage JBL Limited Warranty Contact Information

G2 specifications

JBL Professional G2 series speakers represent a new standard in sound reproduction, boasting a range of features and technologies that cater to both professional audio engineers and casual users. With an emphasis on clarity, power, and durability, the G2 series is ideal for live sound applications, installations, and studio monitoring.

One of the standout characteristics of the G2 series is its advanced driver technology. The speakers are equipped with JBL’s patented Differential Drive woofers, designed to provide high output while reducing distortion. This technology allows the speakers to deliver impressive low frequencies without compromising clarity across the mid and high ranges, ensuring a balanced sound experience. The high-frequency compression drivers are engineered to handle high sound pressure levels, making these speakers suitable for a variety of venues, from small clubs to large concert halls.

The G2 series also features a smart crossover design that optimizes the frequency range for both the woofer and tweeter, enabling seamless integration between the drivers. This results in a coherent and immersive soundstage, allowing listeners to experience music as it was intended. Additionally, the incorporation of high-quality materials in the speaker construction enhances durability, making the G2 series robust enough to withstand the rigors of touring and heavy usage.

Portability is another key aspect of the G2 series, as JBL has designed these speakers to be lightweight and easy to transport. Integrated handles and mounting points enhance usability during setup and breakdown, catering to the needs of mobile sound engineers. Furthermore, the speakers are available in various configurations, including passive and powered versions, allowing users to choose the best fit for their specific requirements.

Connectivity options are also flexible, with XLR and TRS inputs that enable easy integration into existing audio setups. The G2 series can accommodate a wide range of audio gear, ensuring compatibility across different systems.

In summary, JBL Professional G2 series speakers are engineered for high performance and reliability. Their combination of advanced driver technology, smart crossover design, and portable features make them a perfect choice for professionals seeking exceptional sound quality in any setting. Whether used for live performances, installations, or studio monitoring, the G2 series stands out as an industry leader, delivering powerful and pristine audio that resonates with both artists and audiences alike.
Top Page Image Contents