About The EON10 G2, Applications, Features

About The EON10 G2

Applications

•Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues-especially when ease of use and portability are important factors.

•Amplification, mixing, and monitoring for electronic musical instruments.

Features

The second generation of one of the most successful and influential professional speaker systems ever.

•10” Differential Drive® low-frequency driver with a neodymium magnet for low-distortion and light weight.

•1” (throat diameter) JBL compression driver with titanium diaphragm and ferro-fluid cooling.

•Bi-amplified 125 watts low frequency and 50 watts high frequency - actual power delivered to the drivers.

•Built-in 3-input mixer. One balanced mic / line selectable input, one dual-channel TRS 1/4” phone line-level

•Balanced loop-through / mix output. “Daisy-chain” additional EON speakers or send the mixed output to a mixing console or auxiliary EON speaker.

•90° x 60° (nominal) constant directivity horn.

•Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat sink. Air movement in the finned ports dissipates heat - no internal or external cooling fans are required.

•Rugged, lightweight, black co-polymer enclosure with an ergonomic molded in handle and cast aluminum baffle.

•Integral 35 mm pole mount receptacle with securing thumbscrew.

•Multi-angle enclosure for front of house or stage monitor application.

Specifications

Freq. Range (-10 dB):	65 Hz - 18 kHz
Freq. Response (±3 dB):	90 Hz - 16 kHz
Horiz. Coverage (-6 dB):	90° nominal
Vert. Coverage (-6 dB):	60° nominal
Rated Maximum SPL:	117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D):	493 mm x 356 mm x 307 mm (19.4 in x 14.0 in x 12.1 in.)
Net Weight:	10.4 kg (23 lbs.)
LF Driver:	Integral frame with one 10” (254 mm) driver, dual neodymium magnet,
	1.5” Differential-Drive®voice-coil.
HF Driver:	JBL2412 1” (throat diameter) compression driver with titanium diaphragm.
	Ferro-fluid cooled.
Amplifier Power LF:	125 watts @ low-frequency driver impedance.
Amplifier Power HF:	50 watts @ high-frequency driver impedance.
Input 1 Sensitivity:	-48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position)
	-6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity:	-12 dBu to +20 dBu for rated output
Output Level:	+26 dBu (peak), Loop/Mix switch in MIX position
Audio Connectors Input 1:	XLR/F, balanced
Audio Connectors Input 2 & 3:	Single TRS 1/4” Phone
Crossover Freq:	2.7 kHz
Loop/Mix Out:	XLR/M, balanced.
AC Input:	110 - 230 VAC, 50 - 60 Hz, 100 watts rating per UL, detachable IEC
	power cable