Ryobi Outdoor RY52002 manual Symbols, Symbol Name DESIGNATION/EXPLANATION

Page 5

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

50' 15m

50'	15m

	Safety Alert	Precautions that involve your safety.
	Read The Operator’s Manual	To reduce the risk of injury, user must read and
		understand operator’s manual before using this
		product.
	Eye, Hearing, and Head Protection	Wear eye, hearing, and head protection when
		operating this equipment.
	Safety Footwear	Wear non-slip safety footwear when using this
		equipment.
	Gloves	Wear non-slip, heavy-duty protective gloves
		when handling the pole pruner attachment and
		the saw chain.
	Moving Parts	Keep hands away from moving parts.
	Keep Bystanders Away	Keep all bystanders at least 50 ft. (15 m) away.
	Kickback	DANGER! Beware of kickback.
	Hot Surfaces	Indicates HOT SURFACES. Keep all body parts
		away from all hot surfaces.
	Risk of Electrocution	DANGER! Risk of electrocution!
	Gasoline and Oil	Use unleaded gasoline intended for motor vehicle
	Gasoline and Oil	use with an octane rating of 87 [(R + M)/2] or higher.
		This product is powered by a 2-cycle engine and
		requires pre-mixing gasoline and 2-cycle oil.
	Ricochet	Thrown objects can ricochet and result in personal
	Ricochet	injury or property damage.
		injury or property damage.
	No Blade	Do not install or use any type of blade on a product
	No Blade	displaying this symbol.
		displaying this symbol.

5

Image 5

Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules for Pruner USE Specific Safety RulesSpecific Safety Rules for Trimmer USE RefuelingSymbol Name DESIGNATION/EXPLANATION SymbolsService Starter Grip Chain Oiler Tank CAP Engine Switch Product SpecificationsThrottle Trigger Coupler KnobAssembly FeaturesConnecting the Power Head to Installing the Shoulder StrapAttaching the J Barrier Handle Pruner AttachmentPremium Exact MIX Chain OilerFueling and Refueling See Figures 6 OperationPreparation for Pruner Cutting Operating the Trimmer Limbing and PruningSee Figures 8 MaximumTo Advance the Cutting Line Manually To Advance the Cutting LineCutting Tips Grass Deflector Line Trimming CUT-OFF BladeSee Figures 14 Position for StartingStarting and Stopping General Maintenance MaintenanceChain Tension See Figures 17See Figures 19 Replacing the BARChain BAR BAR NUT BAR NUT Chain Tensioning ScrewChain Oiler Tank Replace CAP Remove Idle Speed AdjustmentIdle Speed Screw See Figures 28 Chain MaintenanceHOW to Sharpen the Cutters NEW Prewound Spool Spool ReplacementSee Figures 32 Spool Retainer Spring Slots Eyelets String Head ShaftSee Figures 34 String ReplacementArrows on Spool Anchor Hole First String SlotReplacing and Cleaning AIR Filter Cleaning the Exhaust Port and MufflerSpark Arrestor Fuel CAPProblem Cause Remedy TroubleshootingLimited Warranty Statement WarrantyOWNER’S Warranty Responsibilities MANUFACTURER’S Warranty CoverageMaintenance Requirements CoverageThis Product WAS Manufactured with a Catalyst Muffler California Proposition Service Model NO. and Serial no