Ryobi Outdoor RY52001, RY52001A manual Specific Safety Rules for Pruner USE, Refueling

Page 4

SPECIFIC SAFETY RULES

SPECIFIC SAFETY RULES FOR PRUNER USE

nKickback is a dangerous reaction that can lead to serious injury. Kickback may occur when the moving chain con- tacts an object at the upper portion of the tip of the guide bar or when the wood closes in and pinches the chain in the cut. Contact at the upper portion of the tip of the guide bar can cause the chain to dig into the object and stop the chain for an instant. The result is a lightning-fast, reverse reaction which kicks the guide bar up and back toward the operator. If the chain is pinched along the top of the guide bar, the guide bar can be driven rapidly back toward the operator, which can cause loss of control and may result in serious injury. Do not rely exclusively upon the safety devices built into the product.

With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.

nMake sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction while you are operating the unit.

nCut only when visibility and light are adequate for you to see clearly.

nDo not use on a ladder or unstable support. Always cut with both feet on solid ground to prevent being pulled off balance.

nTo protect yourself from electrocution, do not operate within 50 feet of overhead electrical lines.

nBefore starting the engine, make sure the chain is not contacting any object.

nAlways cut with the engine running at full speed. Fully squeeze the throttle trigger and maintain a steady cutting speed.

nDo not force tool. Use the correct tool for your applica- tion. The correct tool will do the job better and safer at the rate for which it is designed.

nTo protect yourself from falling branches, do not stand di- rectly under the branch or limb being cut. This unit should not be held at an angle over 60° from ground level.

nKeep the handles dry, clean, and free of oil or fuel mix- ture.

nShut off the engine and make sure the cutting attachment has stopped before setting the unit down.

nTo prevent electrical shock or serious personal injury, do not use this product with any AC power head.

nFollow the sharpening and maintenance instructions for the saw chain.

nUse only the replacement guide bars and low kickback chains specified for the unit.

SPECIFIC SAFETY RULES FOR TRIMMER USE

nReplace string head if cracked, chipped, or damaged in any way. Be sure the string head or blade is properly installed and securely fastened. Failure to do so can cause serious injury.

nMake sure all guards, straps, deflectors, and handles are properly and securely attached.

nUse only the manufacturer’s replacement string in the cutting head. Do not use any other cutting attachment. To install any other brand of cutting head to this string trimmer can result in serious personal injury.

nNever operate unit without the grass deflector in place and in good condition.

nMaintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 30 in. or more above the ground.

REFUELING

nFUEL IS HIGHLY FLAMMABLE. Take precautions when using to reduce the chance of serious personal injury.

nStore fuel in a cool, well-ventilated area, safely away from spark and/or flame-producing equipment

nStore fuel in containers specifically designed for this purpose.

nOnly refuel outdoors and do not smoke while refueling.

nAdd fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.

nIf fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.

nReplace all fuel tank and container caps securely.

nIf the fuel tank has to be drained, do this outdoors.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules for Pruner USESpecific Safety Rules for Trimmer USE RefuelingSymbols Symbol Name DESIGNATION/EXPLANATIONService Product Specifications Engine SwitchChain Oiler Tank CAP Starter Grip BAR Coupler Knob Chain Scabbard Trimmer AttachmentFeatures AssemblyInstalling the Shoulder Strap Connecting the Power Head toAttaching the J Barrier Handle Pruner AttachmentFueling and Refueling Chain OilerPremium Exact MIX Preparation for Pruner Cutting OperationSee Figures 6 Limbing and Pruning Operating the TrimmerSee Figures 8 MaximumTo Advance the Cutting Line To Advance the Cutting Line ManuallyCutting Tips Grass Deflector Line Trimming CUT-OFF BladePosition for Starting Starting and StoppingTo Stop the Engine Primer Bulb Starter GripMaintenance General MaintenanceChain Tension See Figures 17Replacing the BAR See Figures 19Chain BAR BAR NUT BAR NUT Chain Tensioning ScrewIdle Speed Screw Idle Speed AdjustmentChain Oiler Tank Replace CAP Remove HOW to Sharpen the Cutters Chain MaintenanceSee Figures 28 Spool Replacement NEW Prewound SpoolSee Figures 32 Spool Retainer Spring Slots Eyelets String Head ShaftString Replacement See Figures 34Arrows on Spool Anchor Hole First String SlotCleaning the Exhaust Port and Muffler Replacing and Cleaning AIR FilterSpark Arrestor Fuel CAPTroubleshooting Problem Cause RemedyWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage Emissions Maintenance Schedule and Warranted Parts List AIR Filter AssyCarburetor Assy Fuel Tank AssyService Model NO. and Serial no California Proposition

RY52001, RY52001A specifications

The Ryobi Outdoor RY52001 and RY52001A models represent the latest in innovative outdoor power equipment, designed for both homeowners and landscaping professionals seeking a reliable, efficient, and powerful tool for their yard care needs. These products exemplify Ryobi's commitment to providing cutting-edge technologies and exceptional user experiences.

One of the standout features of the Ryobi RY52001 and RY52001A is their powerful engine, which delivers robust performance for tackling various outdoor tasks. The 50cc 2-cycle engine provides ample power for cutting through thick grass, weeds, and brush, facilitating efficient yard maintenance. Users appreciate the lightweight design of the equipment, which enhances maneuverability and reduces fatigue during extended use.

These models come equipped with advanced starting technologies that simplify operation. The Ryobi Easy Start System minimizes resistance in the starting cord, making it easier to start the engine with minimal effort. This feature is particularly valuable for users who may struggle with traditional pull-start mechanisms, ensuring that more time can be spent on the job rather than wrestling with equipment.

Another noteworthy characteristic of the RY52001 and RY52001A is their versatility. These models are designed for multifaceted applications, including trimming, edging, and clearing debris. The adjustable cutting head allows for precise control, enabling users to navigate around obstacles and achieve a neat and clean finish. The optional attachments expand functionality, offering capabilities such as tilling, blowing, or even cultivating, making this equipment suitable for a variety of outdoor chores.

Additionally, the ergonomically designed handles enhance comfort and user control. The anti-vibration technology built into the handles reduces fatigue, promoting longer usage without discomfort. The overall design is aimed at maximizing user efficiency while providing a pleasant working experience.

Safety is also a priority with the Ryobi RY52001 and RY52001A. Both models feature protective guards and safety switches to prevent accidental starts, ensuring that users can operate these powerful machines with peace of mind.

In conclusion, the Ryobi Outdoor RY52001 and RY52001A models showcase a blend of power, efficiency, and comfort, making them essential tools for outdoor maintenance. With their reliable engines, user-friendly features, and versatility, these models are well-suited for tackling various lawn care and landscaping tasks, meeting the needs of both novice users and seasoned professionals alike.
Top Page Image Contents