Ryobi Outdoor PBC3046B, RY70107 Converting from Brushcutter to String Trimmer, Removing the Blade

Page 10

ASSEMBLY

INSTALLING THE BLADE

See Figure 8.

1.Place the upper flange washer over the gear shaft with the hollow side toward the blade guard.

2.Center the blade on the upper flange, making sure the blade sits flat. Install the cupped washer with the raised center away from the blade. Install the blade nut. The blade turns counterclockwise from the operator’s posi- tion.

3.Place the holding pin through the slot in the upper flange washer and the hole in the gear head. Using the 13 mm (1/2 in.) wrench supplied, turn the blade nut counter- clockwise.

4.Tighten nut securely.

CONVERTING FROM BRUSHCUTTER TO STRING TRIMMER

REMOVING THE BLADE

See Figure 8.

1.Place the holding pin through the slot in the upper flange washer and the gear head. Turn the blade nut clockwise to remove.

2.Remove the cupped washer and the blade.

3.Remove the upper flange washer from the gear shaft and retain for the string head installation.

4.Attach the grass deflector to the blade guard by placing the three locking tabs into the three notches.

5.Snap the blade guard and grass deflector together to lock into place.

NOTE: Store the brushcutter parts together for later use.

INSTALLING THE STRING HEAD

See Figure 7.

1.Install the upper flange washer onto the gear shaft with the hollow side toward the gear head.

2.Place the holding pin through the slot in the upper flange washer and the hole in the gear head. Using the 16 mm (5/8 in.) wrench supplied, turn the drive connector counterclockwise to install. Tighten securely.

3.Place the string head on the drive connector.

4.Place the holding pin through the slot in the upper flange washer and the hole in the gear head. Install the spool retainer and turn counterclockwise to tighten securely.

GEAR

HEAD

BLADE

GUARD

HOLDING PIN

CUPPED

WASHER

BLADE NUT

UPPER FLANGE

WASHER

BLADE

WRENCH

(13 mm)

Fig. 8

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Save this Manual for Future Reference Table of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data 2000 2500 min-1Instructions FeaturesUnpacking Packing List for Owners KITSee Figure AssemblyHandle Throttle Trigger TOP Clamp Handle BAR BottomAttaching the Shoulder Strap Muffler Guard AssemblyBent END Muffler Guard Opening in Rear Housing Grass Deflector and Blade Guard USEGrass Deflector Blade GuardConverting from String Trimmer to Brushcutter Converting from Brushcutter to String Trimmer Installing the BladeInstalling the String Head Removing the BladeFuel and Refueling OperationOperating the Trimmer Cutting Tips Advancing the StringGrass Deflector Line Trimming CUT- OFF Blade TRI-ARC Blade Operating the BrushcutterCutting Technique Blade To Start a Cold Engine Starting and StoppingSee Figures 14 To Start a Warm EngineNEW Prewound Spool MaintenanceSpool Replacement EZ Line TAP Advance System See Figures 16Blade Protector Spark Arrestor Cleaning the Exhaust Port and MufflerReplacing and Cleaning AIR Filter See Figures 23Spark Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Idle speed. See FigureIdle Speed Screw Guarantee Statement Rtsa / Rtuk / RTG WarrantySafety Directive EC Declaration of ConformityRyobi Technologies GmbH

PBC3046B, RY70107 specifications

The Ryobi Outdoor PBC3046B, RY70107 is a powerful and versatile tool designed to meet the demands of outdoor maintenance and landscaping. It combines performance, convenience, and innovation, making it a popular choice among homeowners and professional landscapers alike.

One of the standout features of the PBC3046B is its robust 30cc engine, which delivers reliable power for a variety of outdoor tasks. This engine provides enough torque to handle tough cutting jobs while maintaining fuel efficiency, making it an ideal choice for long hours of work. The easy-start technology ensures that users can get to work quickly without the frustration of a hard-to-start engine.

This model is equipped with a unique automatic oiling system that enhances the longevity of the equipment by providing consistent lubrication to the cutting chain. This feature not only reduces maintenance time but also ensures optimal performance throughout the tool's lifespan. The adjustable chain tensioning system allows for easy and quick adjustments, ensuring smooth operation without the need for additional tools.

Another key technological advancement in the Ryobi PBC3046B is its lightweight design. Weighing in at just over 10 pounds, this tool is maneuverable and easy to handle, reducing fatigue during extended use. The ergonomic handle provides a comfortable grip, making it suitable for a wide range of users, from casual gardeners to seasoned professionals.

The dual-mode function for cutting and trimming offers versatility, allowing users to switch from trimming grass to cutting larger branches with ease. The interchangeable attachments expand the tool's capabilities, making it suitable for various landscaping applications, including edging, pruning, and clearing debris.

Durability is a core characteristic of the PBC3046B, featuring a high-impact housing that withstands harsh outdoor conditions. The equipment is designed to resist wear and tear, ensuring it remains a reliable partner in outdoor maintenance for years to come.

In summary, the Ryobi Outdoor PBC3046B, RY70107 is a multifunctional tool built for efficiency and durability. With its powerful engine, advanced technologies, and lightweight design, it is a valuable addition to any outdoor toolkit, catering to both home gardeners and professional landscapers seeking high performance and reliability.
Top Page Image Contents