Ryobi Outdoor PBC3046B, RY70107 manual Troubleshooting, Idle speed. See Figure

Page 19

TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACTYOUR AUTHORIZED SERVICE DEALER.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Engine will not start:

1. No spark.

1. Check spark. Remove spark plug. Reattach the

 

 

spark plug cap and lay spark plug on metal

 

 

cylinder. Pull the starter rope and watch for

 

 

spark at spark plug tip. If there is no spark,

 

 

repeat test with a new spark plug.

 

2. No fuel.

2. Push primer bulb until bulb is full of fuel. If bulb

 

 

does not fill, primary fuel delivery system is

 

 

blocked. Contact a servicing dealer. If primer

 

 

bulb fills, engine may be flooded (see next

 

 

item).

 

3. Flooded engine.

3. Remove spark plug, turn trimmer so spark plug

 

 

hole is aimed at the ground. Make sure lever is

 

 

in the “WARM START” position and pull starter

 

 

cord 10 to 14 times. This will clear excess fuel

 

 

from engine. Clean and reinstall spark plug.

 

 

With the throttle trigger fully depressed, pull

 

 

starter cord three times with lever at “WARM

 

 

START” position. If engine does not start,

 

 

move choke lever to “COLD START” and follow

 

 

normal starting instructions in "STARTING

 

 

AND STOPPING" section. If engine still fails to

 

 

start, repeat procedure with a new spark plug.

 

4. Starter rope pulls harder now than

4. Contact a servicing dealer.

 

when new.

 

 

 

 

 

 

 

Lever will not go into the

Throttle trigger is depressed.

Release throttle trigger. Refer to “Starting and

"COLD START" position:

 

Stopping” earlier in this manual.

 

 

 

 

Engine starts but will not

Carburetor requires adjustment.

*Turn “L” needle counterclockwise 1/16 turn. If

accelerate:

 

“L” low needle can not be turned counterclock-

 

 

wise, do not force plastic limiter caps. Contact a

 

 

servicing dealer. See Figure 25.

 

 

 

 

Engine does not reach full

1. Check oil fuel mixture.

1. Use fresh fuel and the correct 2-cycle oil mix.

speed and emits excessive

2. Air filter dirty.

2. Clean air filter. Refer to “Replacing and

smoke:

 

Cleaning Air Filter” earlier in this manual.

 

3. Carburetor requires adjustment.

3. Turn “H” needle clockwise 1/16 - 1/8 turn. See

 

 

Figure 25.

 

 

 

 

Engine starts, runs, and

Carburetor requires adjustment.

Turn idle speed screw clockwise to increase

accelerates but will not

 

idle speed. See Figure 25.

idle:

 

 

 

 

 

 

 

 

Blade continues to rotate at

Carburetor requires adjustment.

Turn idle speed screw counterclockwise to reduce

idle speed:

 

idle speed. See Figure 25. If after adjustment,

 

 

blade continues to rotate, return to an authorized

 

 

servicing dealer for repair.

 

 

 

 

 

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Save this Manual for Future Reference Safety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation Symbols2000 2500 min-1 Technical DataPacking List for Owners KIT FeaturesUnpacking InstructionsThrottle Trigger TOP Clamp Handle BAR Bottom AssemblyHandle See FigureGrass Deflector and Blade Guard USE Muffler Guard AssemblyBent END Muffler Guard Opening in Rear Housing Attaching the Shoulder StrapGrass Deflector Blade GuardConverting from String Trimmer to Brushcutter Removing the Blade Installing the BladeInstalling the String Head Converting from Brushcutter to String TrimmerFuel and Refueling OperationOperating the Trimmer Cutting Tips Advancing the StringGrass Deflector Line Trimming CUT- OFF Blade TRI-ARC Blade Operating the BrushcutterCutting Technique Blade To Start a Warm Engine Starting and StoppingSee Figures 14 To Start a Cold EngineSee Figures 16 MaintenanceSpool Replacement EZ Line TAP Advance System NEW Prewound SpoolBlade Protector See Figures 23 Cleaning the Exhaust Port and MufflerReplacing and Cleaning AIR Filter Spark ArrestorSpark Plug Fuel CAPStorage 1 Month or Longer Idle speed. See Figure TroubleshootingIdle Speed Screw EC Declaration of Conformity WarrantySafety Directive Guarantee Statement Rtsa / Rtuk / RTGRyobi Technologies GmbH

PBC3046B, RY70107 specifications

The Ryobi Outdoor PBC3046B, RY70107 is a powerful and versatile tool designed to meet the demands of outdoor maintenance and landscaping. It combines performance, convenience, and innovation, making it a popular choice among homeowners and professional landscapers alike.

One of the standout features of the PBC3046B is its robust 30cc engine, which delivers reliable power for a variety of outdoor tasks. This engine provides enough torque to handle tough cutting jobs while maintaining fuel efficiency, making it an ideal choice for long hours of work. The easy-start technology ensures that users can get to work quickly without the frustration of a hard-to-start engine.

This model is equipped with a unique automatic oiling system that enhances the longevity of the equipment by providing consistent lubrication to the cutting chain. This feature not only reduces maintenance time but also ensures optimal performance throughout the tool's lifespan. The adjustable chain tensioning system allows for easy and quick adjustments, ensuring smooth operation without the need for additional tools.

Another key technological advancement in the Ryobi PBC3046B is its lightweight design. Weighing in at just over 10 pounds, this tool is maneuverable and easy to handle, reducing fatigue during extended use. The ergonomic handle provides a comfortable grip, making it suitable for a wide range of users, from casual gardeners to seasoned professionals.

The dual-mode function for cutting and trimming offers versatility, allowing users to switch from trimming grass to cutting larger branches with ease. The interchangeable attachments expand the tool's capabilities, making it suitable for various landscaping applications, including edging, pruning, and clearing debris.

Durability is a core characteristic of the PBC3046B, featuring a high-impact housing that withstands harsh outdoor conditions. The equipment is designed to resist wear and tear, ensuring it remains a reliable partner in outdoor maintenance for years to come.

In summary, the Ryobi Outdoor PBC3046B, RY70107 is a multifunctional tool built for efficiency and durability. With its powerful engine, advanced technologies, and lightweight design, it is a valuable addition to any outdoor toolkit, catering to both home gardeners and professional landscapers seeking high performance and reliability.
Top Page Image Contents