Ryobi Outdoor PBC3046B, RY70107 manual Blade Protector

Page 16

MAINTENANCE

STRING REPLACEMENT

See Figures 18, 19, 20, and 21.

1.Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise.

2.Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool.

3.Cut two pieces of string, each being approximately 2.7 m (9 ft.) long.

4.Insert the first string into the anchor hole in the upper part of the spool. Wind the first string around the upper part of the spool counterclockwise, as shown by the arrows on the spool. Place string in the slot on upper spool flange, leaving about 152 mm (6 in.) extended beyond the slot. Do not overfill. After winding the string, there should be at least 6 mm (1/4 in.) between the wound string and the outside edge of the spool.

5.Repeat above step with second string, using the bottom part of spool. Do not overfill.

6.Replace the spool and the spool retainer. Refer to "Spool Replacement " earlier in this manual.

SPRING

SPOOL

ARROWS ON

SPOOL

ANCHOR

HOLE

FIRST STRING

Fig. 18

 

FIRST STRING

SLOT

Fig. 19

SECOND

STRING

Fig. 20

SLOT

ARROWS ON

 

SPOOL

Fig. 21

BLADE PROTECTOR

See Figures 22.

Always place the blade protector on the blade when the unit is not in use. The blade protector has clips around the edges to snap over the blade and keep it in place. Wear gloves and be cautious when handling the blade.

NOTE: Always remove the blade protector before using the unit. If not removed, the blade protector could become a thrown object as the blade begins to turn.

BLADE

BLADE

PROTECTORCLIPS

Fig. 22

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Save this Manual for Future Reference Table of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data 2000 2500 min-1Features UnpackingInstructions Packing List for Owners KITAssembly HandleSee Figure Throttle Trigger TOP Clamp Handle BAR BottomMuffler Guard Assembly Bent END Muffler Guard Opening in Rear HousingAttaching the Shoulder Strap Grass Deflector and Blade Guard USEGrass Deflector Blade GuardConverting from String Trimmer to Brushcutter Installing the Blade Installing the String HeadConverting from Brushcutter to String Trimmer Removing the BladeFuel and Refueling OperationOperating the Trimmer Cutting Tips Advancing the StringGrass Deflector Line Trimming CUT- OFF Blade TRI-ARC Blade Operating the BrushcutterCutting Technique Blade Starting and Stopping See Figures 14To Start a Cold Engine To Start a Warm EngineMaintenance Spool Replacement EZ Line TAP Advance SystemNEW Prewound Spool See Figures 16Blade Protector Cleaning the Exhaust Port and Muffler Replacing and Cleaning AIR FilterSpark Arrestor See Figures 23Spark Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Idle speed. See FigureIdle Speed Screw Warranty Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of ConformityRyobi Technologies GmbH

PBC3046B, RY70107 specifications

The Ryobi Outdoor PBC3046B, RY70107 is a powerful and versatile tool designed to meet the demands of outdoor maintenance and landscaping. It combines performance, convenience, and innovation, making it a popular choice among homeowners and professional landscapers alike.

One of the standout features of the PBC3046B is its robust 30cc engine, which delivers reliable power for a variety of outdoor tasks. This engine provides enough torque to handle tough cutting jobs while maintaining fuel efficiency, making it an ideal choice for long hours of work. The easy-start technology ensures that users can get to work quickly without the frustration of a hard-to-start engine.

This model is equipped with a unique automatic oiling system that enhances the longevity of the equipment by providing consistent lubrication to the cutting chain. This feature not only reduces maintenance time but also ensures optimal performance throughout the tool's lifespan. The adjustable chain tensioning system allows for easy and quick adjustments, ensuring smooth operation without the need for additional tools.

Another key technological advancement in the Ryobi PBC3046B is its lightweight design. Weighing in at just over 10 pounds, this tool is maneuverable and easy to handle, reducing fatigue during extended use. The ergonomic handle provides a comfortable grip, making it suitable for a wide range of users, from casual gardeners to seasoned professionals.

The dual-mode function for cutting and trimming offers versatility, allowing users to switch from trimming grass to cutting larger branches with ease. The interchangeable attachments expand the tool's capabilities, making it suitable for various landscaping applications, including edging, pruning, and clearing debris.

Durability is a core characteristic of the PBC3046B, featuring a high-impact housing that withstands harsh outdoor conditions. The equipment is designed to resist wear and tear, ensuring it remains a reliable partner in outdoor maintenance for years to come.

In summary, the Ryobi Outdoor PBC3046B, RY70107 is a multifunctional tool built for efficiency and durability. With its powerful engine, advanced technologies, and lightweight design, it is a valuable addition to any outdoor toolkit, catering to both home gardeners and professional landscapers seeking high performance and reliability.
Top Page Image Contents