Pentair IC20, IC40 Cell Usage Hours Meter, Electrolytic Cell Cleaning

Page 16

10

Monthly Service (Continued)

3.Total Alkalinity Test: Test pool water for total alkalinity with a test kit. Adjust according to your pool professional’s recommendations. 80-120 PPM APSP Standard.

4.Stabilizer (Cyanuric Acid): Test pool water stabilizer (cyanuric acid) level using a test kit or by having a water sample tested by a pool professional. Maintain ideal range of 50-75 PPM. Follow your pool professional’s recommendations.

5.Calcium Hardness: Test pool water for calcium hardness level using test kit or by having a water sample tested by a pool professional. If necessary, adjust according to your pool professional’s recommendations. APSP standard of 200-400 PPM is recommended.

6.Metals Test: It is recommended that the pool water be tested periodically for the presence of metals such as copper, iron, and manganese. These metals should not be present in the pool water. If those metals are present, contact the your pool professional.

Cell Usage Hours Meter

IntelliChlor provides a built-in cell “usage hours” meter that reports how many hours IntelliChlor has been operating. The cell is designed to operate for approximately 10,000 hours before replacement is needed or roughly five years of average use.

To access the system status mode:

1.Press and hold the MORE button for three seconds until the lights scroll across the unit.

2.One of the five Output LED indicators (20%, 40%, 60%, 80% and 100%) will be lit, indicating the hours of usage. The Output LEDs are as follows:

•2000 hours (20% LED on)

•4000 hours (40% LED on)

•6000 hours (60% LED on)

•8000 hours (80% LED on)

•10,000 hours (100% LED on)

Electrolytic Cell Cleaning

1.Automatic Cleaning. This unit has an automatic cell-cleaning feature (Cell Reversing) that removes scale deposits from the electrolytic cell. Note Automatic Cleaning does not interrupt Chlorine Production. “Scale” is a white crusty deposit that forms in excessively hard water or from pool water that is out of balance and in a scaling condition. If the cell shows excessive scaling, you need to perform an acid wash cleaning. Proceed to “Acid Wash Cleaning,” Step 2.

2.Acid Wash Cleaning. If the electrolytic cell has a tendency to scale, it is recommended that every two months the cell be removed and inspected for scale formation and/or debris. Some filters allow debris to pass through to the cell, possibly lodging between the plates in the cell. A small amount of scale formation is normal. If by looking through the cell it is observed that there is excessive scale formation between the plates or debris is present, the cell must be cleaned as follows:

a.Use a high-pressure jet of water from a garden hose. If the cell cannot be reasonably cleaned in this manner, acid cleaning is necessary.

IntelliChlor Installation and User’s Guide

Page 15 Page 17
Image 16
Page 15 Page 17
Contents IntelliChlor Electronic Chlorine Generator Trademarks and disclaimers Contents Important Safety Precautions Iii Technical Support Web sitesIntelliChlor Overview FeaturesIntelliChlor models Electrolytic Cell Controller IntelliChlor Power Center System DiagramLoop Plumbing Diagram IntelliChlor Plumbing DiagramSalt Level Status LEDs Status LEDsSanitizer Output LED Indicators Self Cleaning reverseOperator Control Panel More and Less Output ButtonsInitial Start up Period OperationStartup Procedure Super Chlorination Apply powerOperating in winter RecommendationsWeekly service Daily serviceMonthly Service Electrolytic Cell Cleaning Cell Usage Hours MeterWinterizing Chemistry You Need to KnowOptimum Pool Water Conditions What Type of Salt to Use Chlorine TestingHow Much Salt to Use? How to Add Salt to the Pool Approximate Pounds kg of Salt Needed to Maintain 3,000 PPM Pool Water Preparation Selecting Model SizeDetermining Pool Size m3 of Water inYour Pool Determining Pool Size Gallons ofWater inYour PoolKit Contents Required ToolsInstalling the Cell Assembly Connecting the Cell Power Cable to the Power CenterScrew terminal pin-outs Connecting IntelliChlor to an IntelliTouch System Personality BoardConnecting IntelliChlor to an EasyTouch System COM Port J20Troubleshooting TroubleshootingTroubleshooting System Specifications 110 VAC and 220 VAC Wiring VAC Basic System WiringLimited Warranty 520589 Rev D

IC20, IC40 specifications

Pentair is a well-established name in the pool and spa equipment industry, offering innovative solutions for a variety of water management needs. Among its extensive product line are the Pentair IC20 and IC40 salt chlorinators, which are highly regarded for their efficiency and advanced technology in maintaining clean and clear swimming pool water.

The Pentair IC20 and IC40 salt chlorinators are designed to convert salt into chlorine, effectively sanitizing the pool water without the need for traditional chlorine chemicals. This process results in softer water that is gentler on the skin and eyes, making swimming a more enjoyable experience. Both models cater to different pool sizes, with the IC20 suitable for pools up to 20,000 gallons and the IC40 accommodating pools up to 40,000 gallons.

One of the standout features of these models is their user-friendly digital display, which allows pool owners to easily monitor and manage the chlorine production settings. This digital interface offers precise control over the output, allowing users to adjust chlorine levels based on their specific pool requirements. The intuitive design means that even those who are not particularly tech-savvy can effectively operate the unit.

The IC20 and IC40 also feature advanced self-cleaning technology. By periodically reversing the polarity of the electrodes, these units help to prevent calcium buildup, ensuring that the chlorinator operates efficiently. This self-cleaning function reduces maintenance efforts and prolongs the lifespan of the equipment.

Both models utilize durable materials designed to withstand harsh pool environments. The housing is constructed from high-quality, corrosion-resistant materials, ensuring longevity and reliability. Additionally, with a robust warranty offered by Pentair, customers can have peace of mind knowing they are investing in a dependable product.

In terms of energy efficiency, the Pentair IC20 and IC40 are engineered to minimize energy consumption, making them environmentally friendly options for pool owners. Their reliable performance combined with low operating costs makes these saltwater chlorinators not only practical but also economical.

Overall, the Pentair IC20 and IC40 salt chlorinators represent exceptional choices for those seeking to maintain sparkling clean pool water with minimal effort. With their advanced technologies, ease of use, and durability, they stand out as leading solutions in the world of pool sanitation. Whether for residential or light commercial use, these units deliver effective chlorine generation, ensuring your pool remains a welcoming oasis throughout the swimming season.
Top Page Image Contents