Bissell 6100 warranty Transporting your cleaner, Releasing the power cord, Fingertip power switch

Models: 6100

1 20
Download 20 pages 35.37 Kb
Page 6
Image 6

Operation

Transporting your cleaner

Use the handle on the front to carry the cleaner or place the cleaner in the upright position and tip back to roll on the rear wheels.

Releasing the power cord

The upper and lower cord wraps rotate to allow for quick and easy removal of the power cord.

Fingertip power switch

The power button is located at the top of the vacuum handle.

To turn cleaner ON, press

button once.

To turn cleaner OFF, press

button again.

Note: The rotating brush will not turn on unless the unit is in the reclined position and the brush switch is on.

Handle positions

Use your foot to pull the handle release pedal back to recline the vacuum cleaner.

Height adjustment

There are seven height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting.

Lowest setting – For bare floors.

Medium settings – For short and medium pile carpets.

High setting – For plush carpet.

Note: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

If the dial is difficult to turn, tilt the cleaner

back slightly to take the weight off the foot while turning.

ATTENTION:

Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may aggravate this condition. Consider setting your cleaner on a higher than normal setting for this type of carpet.

6 w w w . b i s s e l l . c o m

Page 6
Image 6
Bissell 6100 warranty Transporting your cleaner, Releasing the power cord, Fingertip power switch, Handle positions

6100 specifications

The Bissell 6100 is a standout model in the world of carpet cleaning systems, providing powerful solutions for maintaining cleanliness in households and commercial spaces alike. Known for its efficiency and innovative design, the Bissell 6100 is built to tackle tough stains and deep-seated dirt, making it a valuable asset for carpet care.

One of the main features of the Bissell 6100 is its Dual-Spin Technology. This advanced system uses two rotating brushes that work in unison to agitate carpet fibers, effectively loosening dirt and grime. The powerful suction that follows ensures that the debris and moisture are lifted away, leaving carpets fresh and clean. This technology is particularly useful for high-traffic areas where dirt accumulates quickly.

The Bissell 6100 is equipped with a large water tank, allowing for extended cleaning sessions without the need for frequent refills. This is particularly advantageous for larger spaces or multi-room cleaning tasks. The tank is easy to remove and refill, providing convenience and ease of use whether you are tackling carpets, upholstery, or even some hard floors.

Another notable characteristic of the Bissell 6100 is its lightweight design. Weighing significantly less than many traditional carpet cleaners, it is easy to maneuver around furniture and tight spaces. This portability does not compromise its power, making it an ideal choice for users looking for a balance of strength and convenience.

Moreover, the Bissell 6100 features a variety of cleaning modes, allowing users to customize the cleaning process based on the type of surface being addressed. Whether it’s gentle cleaning for delicate fabrics or a more aggressive approach for heavy-duty messes, this model offers versatility for different cleaning needs.

The inclusion of smart technology, such as a built-in heater, enhances the cleaning capabilities by heating water to enhance dirt removal. Finally, the Bissell 6100 is designed with user-friendly features, including easy-to-access controls and a compact design for storage.

In summary, the Bissell 6100 combines powerful cleaning performance with innovative technology and user-focused design, making it an excellent choice for anyone serious about maintaining the cleanliness of their carpets and upholstery.