Panasonic pt-ae900e manual Adjusting the picture

Adjusting the picture

#Press the MENU button to display the menu screen.

$Select the “PICTURE” menu from the main menu, and then press the ENTER button.

%Press the F or G button to select an item.

&Press the I or H button to adjust the value or change the setting. For items with selective setting or a bar scale, the individual adjustment screen will be displayed. Press the F or G button to switch the item.

For items without any selective setting or bar scale, press the ENTER button. The next screen for the item will then be displayed.

TINT

(NTSC/NTSC 4.43/YPBPR/PC/HDMI only)

This adjusts the flesh tones in the picture.

The flesh tones are greenish: I button

The flesh tones are reddish: H button

NOTE:

BWhen PC signals are being

Noise Reduction (NR)

If the signal is of such poor quality that picture interference appears, set “NR” to “ON”. To turn off the “NR” feature, set to “OFF”.

NOTE:

When an S-VIDEO/VIDEO/SCART signal is being input

When a YPBPR/PC/HDMI signal is being input

PICTURE MODE

The picture mode can be selected. Refer to page 33 for details.

CONTRAST

This adjusts the contrast of the picture. (Adjust the “BRIGHT” setting first if required before adjusting the “CONTRAST” setting.) The picture is bright: I button The picture is dark: H button

BRIGHT

This adjusts the darker areas (black areas) in the picture.

Black areas are too light: I button

Dark areas are too solid: H button

COLOUR

(S-VIDEO/VIDEO/YPBPR/PC/HDMI only)

The colour is too deep: I button

The colour is too pale: H button

NOTE:

BWhen PC signals are being input, adjustment can be made only when 1 125 (1 080)/60i and 1 125 (1 080)/50i signals are being input.

input, adjustment can be made

only when 1 125 (1 080)/60i

and 1 125 (1 080)/50i signals

are being input.

SHARPNESS

To soften the picture details:

Ibutton

To sharpen the picture details:

Hbutton

COLOUR TEMP.

White areas are bluish: I button

White areas are reddish: H button

DYNAMIC IRIS

ON

The amount of light is controlled to project the images with high contrast.

OFF

“DYNAMIC IRIS” is disabled.

B“NR” cannot be set when HDMI signals are being input.

CINEMA REALITY

[S-VIDEO/VIDEO/PC/HDMI/525i (480i), 625i(576i), 1 125(1 080)/60i and 1 125(1 080)/50i YPBPR only]

ON	settings
Set to “ON” when you would like 24
frames per second pictures (such as
movies) to project the source
faithfully.	and
OFF
	Adjustments
Set to “OFF” when the projected

pictures have problems with captions or subtitles when the setting is “ON”.

44-ENGLISH ENGLISH-45