Accessories
Check that all of the accessories shown below have been included with your projector.
Remote control unit | Mains lead for | Mains lead for U.K. |
(EUR7914Z20 x1) | Continental | (K2CT3FR00003 x1) |
| (K2CM3FR00002 x1) |
|
| AA batteries for remote |
|
| control unit (x2) |
|
Before use
Cautions regarding setting-up
Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions or accidents.
Avoid setting up in places which are subject to sudden temperature changes, such as near an air conditioner.
The life of the lamp may be shortened.
Do not set up the projector near
The projector may be subject to electromagnetic interference.
If installing the projector to the ceiling, ask a qualified technician to carry out all installation work.
You will need to purchase the separate installation kit (Model
If using this projector at high elevations (above 1 400 m), set the “FAN CONTROL” to “HIGH”. (Refer to page 52.)
Failure to observe this may result in malfunctions.
Preparation
