OPERATING
Adjusting Seat
Front-to-Back Adjustment
1.Park machine safely. (See Parking Safely in the SAFETY section.)
2.Sit on the operator seat.
CAUTION: Avoid injury! Never adjust seat while machine is moving. Stop machine before adjusting seat to prevent loss of machine control.
3.To adjust the seat front to back, push and hold the seat adjustment lever
(A) away from the seat.
4.Slide forward or backward to desired position.
5.Release lever.
Seat Height Adjustment
1.Sit on the operator seat.
2.To lower the seat, turn knob (B) counterclockwise.
3.To raise the seat, turn knob (B) clockwise.
Using Seat Belt
CAUTION: Avoid injury! Always wear seat belt when operating machine with
•If folding ROPS must be folded to operate in a low clearance area, do not use seat belt. Raise ROPS and use seat belt as soon as conditions permit.
1.Sit in seat.
2.Pull belts across your lap and insert seat belt buckle (A) into latch (B) until it locks.
3.To release seat belt, press red button (C) until buckle comes out of latch.
Raising and Lowering ROPS
Raising ROPS
1.Park machine safely. (See Parking Safely in the SAFETY section.)
2.Remove spring pin (A) from drilled pin (B) on left and right side of ROPS. 3.Remove drilled pin from left and right side of ROPS.
Operating - 12
