SERVICE TRANSMISSION

Check Neutral Creep

CAUTION: Avoid injury! Engine exhaust fumes contain carbon monoxide and can cause serious illness or death.

Move the machine to an outside area before running the engine.

Do not run an engine in an enclosed area without adequate ventilation.

•Connect a pipe extension to the engine exhaust pipe to direct the exhaust fumes out of the area.

•Allow fresh outside air into the work area to clear the exhaust fumes out.

NOTE: Check and adjust motion control linkages with the machine parked on a hard, level surface.

1.Start engine.

2.Set throttle lever to full-throttle position.

3.Unlock the park brake.

4.If the rear drive wheels begin to creep, an adjustment is required.

Neutral Creep Adjustment

1.Stop engine and lock the park brake.

2.Move both motion control levers to neutral detent position (standard levers) or neutral lock position (optional “over the lap” levers).

3.Raise the rear wheels off the ground and securely support the rear of the machine.

NOTE: When tilting the seat forward, do not tilt the seat so far forward that it moves the motion control levers out of the neutral detent position.

4.Tilt operator seat forward and support the seat frame.

5.Loosen nut (A), and move the dampener (B) in adjusting slot backward or forward to stop machine creep.

•If machine creeps forward, slide dampener to the rear of the adjusting slot. Tighten nut.

•If machine creeps backward, slide dampener to the front of the adjusting slot. Tighten nut.

6.Check for creep, and if the machine still creeps, continue with the next step.

7.Remove pin (C) and disconnect swivel (D) from each traction control rod (E), and rotate the swivel.

8.Rotate swivel (D) to adjust:

•To stop forward creep, rotate each swivel (D) counterclockwise one rotation.

•To stop rearward creep, rotate each swivel (D) clockwise one rotation. 9.Connect swivel to traction control rod.

10.Repeat as needed to stop machine creep. 11.Lower seat.

12.Lower the rear of the machine to the ground. 13.Check maximum speed drift.

Check Maximum Speed Drift

1.Check neutral creep, and adjust as needed.

2.Sit on the seat, and start the engine.

3.Operate machine to bring the hydraulic oil to normal operating temperature.

4.Move the machine in a level, wide-open area, such as an empty parking lot.

5.Run the engine at full throttle.

6.Move and hold both control levers to the full forward position. Observe the machine travel. If the machine does not travel in a straight line, adjustment is required. Note the direction the machine moves.

Maximum Speed Drift Adjustment

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Tilt operator seat forward and support the seat frame.

Service Transmission - 28

Page 29 Page 31
Page 30
Image 30
Great Dane GBKH2752S, GBKH2761S manual Neutral Creep Adjustment, Check Maximum Speed Drift, Maximum Speed Drift Adjustment
Page 29 Page 31

GBKW2561S, GBKH2752S, GBKW2552S, GBKH2761S specifications

The Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S are a series of powerful and versatile washing machines designed to meet the needs of modern households. These models stand out for their innovative features, advanced technologies, and user-friendly characteristics, making laundry more efficient and effective.

One of the main features of the Great Dane washing machines is their large capacity, which allows users to wash a significant amount of laundry in one go. This is particularly beneficial for families or individuals with substantial laundry needs, as it reduces the number of loads required and saves valuable time. Additionally, the machines come equipped with a variety of wash programs tailored to different fabric types and soiling levels, ensuring optimal results for every load.

In terms of technologies, these models incorporate intelligent sensors that automatically adjust wash cycles based on the load size and fabric type. This not only enhances cleaning performance but also improves energy efficiency, as the machines consume only the necessary amount of water and electricity. The Great Dane GBKH2761S and GBKW2561S models feature inverter motors that provide quieter operation and greater reliability, translating to longer-lasting performance.

Another standout characteristic of the Great Dane washing machines is their user-friendly interface. The intuitive control panel allows users to select programs and settings easily, while the digital display provides real-time information on the wash cycle. Furthermore, many models are equipped with a delay start feature, offering flexibility for scheduling laundry around busy lifestyles.

In terms of design, the Great Dane series incorporates sleek aesthetics with durable construction, ensuring they not only perform well but also complement modern home interiors. The energy-efficient ratings of these machines make them environmentally friendly choices, helping users reduce their carbon footprint while maintaining high cleaning standards.

Overall, the Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S represent a blend of cutting-edge technology, capacity, efficiency, and user convenience, making them an ideal choice for consumers seeking reliable and effective washing solutions.
Top Page Image Contents