OPERATING

Engaging Mower

CAUTION: Avoid injury! Clear mowing area of all bystanders when operating this machine.

Thrown objects could cause serious injury or death.

Keep hands and feet away from blades and discharge opening.

Do not mow in reverse unless absolutely necessary.

IMPORTANT: Avoid damage! To help prevent damage to PTO clutch:

• Do not engage PTO with throttle in the fast position.

1.Adjust mower deck to desired cutting height. 2.Start engine.

3.Move throttle lever to the 1/2 - 3/4 throttle position. 4.Unlock the park brake.

5.Move both motion control levers to the neutral position.

NOTE: In cold weather or with a new machine, it may be necessary to engage the choke at the same time as the PTO knob to prevent the engine from stalling.

6.Pull PTO knob (A) up to engage mower deck.

7.Move throttle lever to full-throttle position.

NOTE: The travel speed and turn rate will vary with the amount that the control levers are moved.

8.Push motion control levers forward slowly. Mow at a safe travel speed.

Stopping the Engine

IMPORTANT: Avoid damage! To help prevent engine backfiring, throttle lever should be set at the 1/4 throttle position and run for 30 seconds prior to stopping the engine.

Do not stop engine when mower is on a slope of more than 30° for an extended period of time. Oil may run through valve train into carburetor and muffler.

1.Move the motion control levers to the neutral detent position (standard levers) or neutral lock position (optional “over the lap” levers).

2.Lock the park brake.

3.Push PTO switch down to disengage.

4.Move throttle lever to 1/4-throttle position and run for 30 seconds, then

move throttle to slow position.

A

STOP

5.Turn key switch to STOP position (A).

CAUTION: Avoid injury! Children or bystanders may attempt to move or operate an unattended machine.

Always lock the park brake and remove the key before leaving the machine unattended.

6.Remove key.

Transporting Machine

CAUTION: Avoid injury! Use extra care when loading or unloading the machine into a trailer or truck.

Close fuel shut-off valve, if your machine is equipped.

IMPORTANT: Avoid damage! Transmission damage may occur if the machine is moved or towed incorrectly:

•Move unit by hand only.

•Do not use another vehicle to move unit.

•Do not tow unit.

Use a heavy-duty trailer to transport your machine. Trailer must have signs and lights required by law.

1.Raise the mower deck lift lever to the transport position.

2.Drive machine on trailer.

3.Stop engine and lock the park brake.

4.Remove key.

5.Fasten machine to trailer with heavy-duty straps, chains or cables. Both front and rear straps must be directed down and outward from machine.

Mowing Tips

•Mow grass with throttle lever in the full fast position.

•Cut grass when it is dry.

•Keep mower deck and discharge chute clean.

•Mow with sharp blades.

•Properly level mower deck for a smooth cut.

•Mow grass high and often.

•Use a travel speed that fits the conditions:

Operating - 20

Page 21 Page 23
Page 22
Image 22
Great Dane GBKH2752S, GBKH2761S, GBKW2552S, GBKW2561S Engaging Mower, Stopping the Engine, Transporting Machine, Mowing Tips
Page 21 Page 23

GBKW2561S, GBKH2752S, GBKW2552S, GBKH2761S specifications

The Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S are a series of powerful and versatile washing machines designed to meet the needs of modern households. These models stand out for their innovative features, advanced technologies, and user-friendly characteristics, making laundry more efficient and effective.

One of the main features of the Great Dane washing machines is their large capacity, which allows users to wash a significant amount of laundry in one go. This is particularly beneficial for families or individuals with substantial laundry needs, as it reduces the number of loads required and saves valuable time. Additionally, the machines come equipped with a variety of wash programs tailored to different fabric types and soiling levels, ensuring optimal results for every load.

In terms of technologies, these models incorporate intelligent sensors that automatically adjust wash cycles based on the load size and fabric type. This not only enhances cleaning performance but also improves energy efficiency, as the machines consume only the necessary amount of water and electricity. The Great Dane GBKH2761S and GBKW2561S models feature inverter motors that provide quieter operation and greater reliability, translating to longer-lasting performance.

Another standout characteristic of the Great Dane washing machines is their user-friendly interface. The intuitive control panel allows users to select programs and settings easily, while the digital display provides real-time information on the wash cycle. Furthermore, many models are equipped with a delay start feature, offering flexibility for scheduling laundry around busy lifestyles.

In terms of design, the Great Dane series incorporates sleek aesthetics with durable construction, ensuring they not only perform well but also complement modern home interiors. The energy-efficient ratings of these machines make them environmentally friendly choices, helping users reduce their carbon footprint while maintaining high cleaning standards.

Overall, the Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S represent a blend of cutting-edge technology, capacity, efficiency, and user convenience, making them an ideal choice for consumers seeking reliable and effective washing solutions.
Top Page Image Contents