SAFETY
Emission Control System Certification Label
NOTE: Tampering with emission controls and components by unauthorized personnel may result in severe fines or penalties. Emission controls and components can only be adjusted by EPA and/or CARB authorized service centers. Contact your Great Dane Equipment Retailer concerning emission controls and component questions.
The presence of an emissions label signifies that the engine has been certified with the United States Environmental Protection Agency (EPA) and/or California Air Resources Board (CARB).
The emissions warranty applies only to those engines marketed by Great Dane that have been certified by the EPA and/or CARB; and used in the United States and Canada in
Emission Compliance Period
If your engine has the emission compliance category listed on the emission control system certification or air index label, this indicates the number of operating hours for which the engine has been certified to meet EPA and/or CARB emission requirements. The following table provides the engine compliance period in hours associated with the category found on the certification label.
Agency | Category | Hours |
|
|
|
|
|
|
EPA | C | 250 |
|
|
|
EPA | B | 500 |
|
|
|
EPA | A | 1000 |
|
|
|
CARB | Moderate | 125 |
|
|
|
CARB | Intermediate | 250 |
|
|
|
CARB | Extended | 500 |
|
|
|
Certification
Your product has been tested and evaluated by the manufacturer and conforms with American National Standard
Canadian Electromagnetic Compatibility (EMC) Compliance
This spark ignition system complies with Canadian
Safety
Operator Training Required
•Read the operator’s manual and other training material. If the operator or mechanic cannot read English, it is the owner’s responsibility to explain this material to them. This publication is available in other languages.
•Become familiar with the safe operation of the equipment, operator controls, and safety signs.
•All operators and mechanics should be trained. The owner of the machine is responsible for training the users.
•Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator.
•The owner/user can prevent and is responsible for accidents or injuries occurring to themselves, other people, or property.
•Operate the machine in an open, unobstructed area under the direction of an experienced operator.
Preparation
•Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Only use accessories and attachments approved by the manufacturer.
•Wear appropriate clothing including hard hat, safety glasses and hearing protection. Long hair, loose clothing or jewelry may get tangled in moving parts.
•Inspect the area where the equipment is to be used and remove all objects such as rocks, toys and wire which can be thrown by the machine.
•Use extra care when handling gasoline and other fuels. They are flammable and vapors are explosive.
a.Use only an approved container.
b.Never remove gas cap or add fuel when engine is running. Do not smoke.
c.Never refuel or drain the machine indoors.
•Check that the operator’s presence controls, safety switches and shields are attached and functioning properly. Do not operate unless they are functioning properly.
Operating Safely
•Never run an engine in an enclosed area where dangerous carbon monoxide fumes can collect.
•Only operate in good light, keeping away from holes and hidden hazards.
•Be sure all drives are in neutral and parking brake is engaged before starting engine. Only start engine from the operator’s position. Use seat belts if provided.
•Slow down and use extra care on hillsides. Be sure to travel in the recommended direction on hillsides. For this machine, drive across hillsides, not up and down. Turf conditions can affect the machine’s stability. Use caution while operating near
•Slow down and use caution when making turns and when changing directions on slopes.
•Never raise deck with the blades running.
•Never operate with the PTO shield, or other guards, not securely in place. Be sure all interlocks are attached, adjusted properly, and functioning properly.
•Never operate with the discharge deflector raised, removed or altered, unless using a grasscatcher. Do not operate mower without discharge chute or entire grasscatcher in place.
•Do not change the engine governor setting or overspeed the engine. Operating the engine at excessive speed can increase the hazard of personal injury.
•Stop on level ground, lower implements, disengage drives, engage parking brake, and shut off engine before leaving the operator’s position for any reason including emptying the grasscatchers or unclogging the chute.
•Stop equipment and inspect blades after striking objects or if an abnormal vibration occurs. Make necessary repairs before resuming operations.
•Keep hands and feet away from the cutting units.
•Look behind and down before backing up to be sure of a clear path.
•Never carry passengers and keep pets and bystanders away.
•Slow down and use caution when making turns and crossing roads and sidewalks. Stop blades if not mowing. Watch for traffic when operating near or crossing roadways.
Safety - 5
