Operation
Fingertip brush switch
The rotating brush is turned on or off using the switch at the side of the top of the handle. The brush will start rotating when the unit is reclined. The brush should be on for most carpeted floors. You may want to turn the brush off for bare floor cleaning or other delicate surfaces.
To turn the brush ON, press | button once. |
To turn the brush OFF, press | button again. |
Brush auto shut-off feature
When your cleaner is in the upright position, the brush will not rotate. The brush will rotate only when the cleaner is in the reclined position and the brush switch is on.
Using the tools
1.Make sure the cleaner is in the upright position.
2.Remove the hose wand from the wand base. This automatically diverts the suction to the hose. Unwind the hose from the cleaner.
Note: To help prevent the machine from tipping, the hose should remain in the bottom hose clip.
3 . Use the hose and wand alone or attach any of the tools to the end of the hose wand.
ATTENTION:
Always place the vacuum cleaner on the floor in its fully upright position when using tools. Placing the vacuum in this position automatically stops the rotating brush.
2
w w w . b i s s e l l . c o m
7
