Operation

WARNING:

Do not allow familiarity with products to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood)

Cutting masonite and plastic

Cutting drywall

Cutting metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper

This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs.

For complete charging instructions, refer to the Operator’s Manual for the battery packs and chargers for your models.

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life.

If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged.

TO INSTALL BATTERY PACK

See Figure 2, page 11.

Insert the battery pack into the product as shown.

Make sure the latches on each side of the battery pack snap into place and the battery pack is secured before beginning operation.

TO REMOVE BATTERY PACK

See Figure 2, page 11.

Depress the latches on each side of the battery pack.

Remove the battery pack from the tool.

WARNING:

Battery products are always in operating condition. Therefore, the switch should always be locked when not in use or carrying at your side.

TO INSTALL SAW BLADE

See Figure 3, page 11.

Remove the battery pack.

Lift the blade clamp lock/release lever located on the side of saw.

Insert the saw blade between the blade clamp and the saw bar.

Lower the blade clamp lever to lock.

Replace the battery pack.

SHOE ASSEMBLY

See Figure 4, page 12.

The shoe assembly of the reciprocating saw pivots up and down in both directions. It is adjustable, allowing the use of the blade teeth at different positions on the blade.

To change positions of shoe assembly:

Remove battery pack.

Loosen the set screw near the shoe assembly with the hex key provided with this saw.

Reposition shoe assembly to desired position.

Retighten set screw securely. Do not overtighten screw or use an aid with the hex key.

Remove hex key and store for later use.

Replace the battery pack.

WARNING:

Make sure blade does not touch work until motor reaches full speed, since this could cause loss of control resulting in serious injury.

8 – English

P514 specifications

The Ryobi P514 is a versatile and powerful tool designed for both professional and DIY users looking for efficient performance in their projects. As part of Ryobi’s ONE+ system, the P514 is compatible with over 175 other tools and can utilize the same 18V lithium-ion batteries, providing flexibility and convenience for various applications.

One of the standout features of the P514 is its lightweight design, which weighs only 3.5 lbs, allowing for extended use without causing fatigue. This makes it an ideal choice for tasks that require prolonged handling, such as cutting materials for home improvement or automotive projects. The tool also boasts a compact design that makes it easy to maneuver in tight spaces, enhancing accessibility and control during operation.

The P514 is equipped with a powerful motor that delivers up to 3,200 RPM, making it suitable for cutting through different materials with ease. This capability is complemented by its adjustable depth and bevel settings, allowing users to make precise cuts at various angles and depths, which is particularly useful for carpentry work.

Another important feature of the Ryobi P514 is its blade design. The tool accepts standard 5-1/2-inch blades, including both wood-cutting and metal-cutting options. This adaptability means that users can quickly switch between blades, tailored to specific tasks without needing separate saws for different materials.

The P514 features an electric brake, which stops the blade quickly, enhancing safety and control. Additionally, the integrated rafter hook allows for convenient storage, helping to keep the workspace organized.

For added comfort, the tool comes with a rubber overmold grip that reduces vibrations and enhances handling, providing a better user experience. The tool’s design also includes a built-in LED work light, illuminating the workspace, especially in dimly lit areas, ensuring precision and reducing the chance of errors.

In summary, the Ryobi P514 is a reliable and efficient compact circular saw that combines power, versatility, and comfort. Its lightweight design, high RPM capability, adjustable settings, and compatibility with the ONE+ battery system make it a valuable tool for any workshop. Whether tackling home projects or professional tasks, the Ryobi P514 delivers consistent performance and convenience, making it an excellent choice for users at all experience levels.