Ryobi RY70105A, PBC3046E Starting and Stopping, To Start a Cold Engine, To Start a Warm Engine

Page 15

OPERATION

STARTING AND STOPPING

See Figures 16 and 17.

NOTE: The unit is equipped with an automatic choke feature. The starting instructions for this feature are different from units with a manual choke. Be sure to read and follow the starting instructions below.

WARNING

Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill.

TO START A COLD ENGINE:

1Lay trimmer on a flat, bare surface.

2Push primer bulb 8 to 10 times.

NOTE: Do not squeeze the throttle trigger before engine starts. Squeezing the throttle trigger at this time will prevent the unit from starting.

3Move the lever to the “COLD START” position. See Figure 17.

4Pull the starter rope until engine runs.

5Allow the engine to warm up for 4-10 seconds.

6Depress the throttle interlock, then squeeze and release the throttle trigger. This allows the choke to automati- cally set to the “WARM START” position. Your unit is now ready for use.

NOTE: The lever will automatically set to the “WARM START” position after the throttle trigger is squeezed for the first time.

TO START A WARM ENGINE:

1.Lay trimmer on a flat, bare surface.

2.Choke lever should already be in the “WARM START” position. If not, squeeze and release throttle trigger. Pull the starter rope until unit runs.

TO STOP THE ENGINE:

To stop the engine, depress the switch to the “O” position.

IGNITION SWITCH

I= ON TO RUN O = OFF TO STOP

THROTTLE

TRIGGER

PRIMER BULB

THROTTLE

INTERLOCK

Fig. 16

WARM START

POSITION

COLD START

POSITION

LEVER

Fig. 17

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation SymbolsVibration level racing Technical DataPacking List for OWNER’S KIT FeaturesUnpacking InstructionsAttaching the Storage Hanger AssemblyAttaching the Power Head to the Trimmer Attachment Removing the Attachment from the Power HeadAttaching the Handle Silencer Guard Attaching the Shoulder StrapConverting from Trimmer to Brushcutter Drive Connector Spool RetainerBlade Guard Grass DeflectorRemoving the Blade Installing the BladeInstalling the String Head Converting from Brushcutter to TrimmerOperation Fuel and RefuellingOperating the Trimmer Advancing the String Cutting TipsGrass Deflector Line Trimming CUT- OFF Blade Operating the Brushcutter TRI-ARC BladeCutting Technique Blade To Start a Warm Engine Ignition SwitchStarting and Stopping To Start a Cold EngineSee Figures 18 MaintenanceSpool Replacement EZ Line TAP Advance System NEW PRE-WOUND SpoolArrows on Spool Anchor Hole First String String ReplacementBlade Protector SpringSee Figures 25 Cleaning the Exhaust Port and SilencerReplacing and Cleaning AIR Filter Spark ArresterFuel CAP Sparking PlugStorage 1 Month or Longer Problem Possible Cause Solution TroubleshootingIdle Speed Screw Needle Sound Pressure Sound Power Vibration Model Model no WarrantySafety Directive Guarantee Statement Rtsa / Rtuk / RTGPage Ryobi Technologies GmbH

RY70105A, PBC3046E specifications

The Ryobi PBC3046E and RY70105A are remarkable tools that exemplify innovation and efficiency in outdoor power equipment. Designed for both home and professional use, these models offer a blend of power, versatility, and user-friendly features.

The Ryobi PBC3046E is a high-performance battery-powered chainsaw that operates with a robust 3046 system. This tool is designed for cutting through various types of wood, making it an excellent choice for homeowners and landscapers alike. One of its main features is the brushless motor technology which provides increased efficiency and runtime. This means users can enjoy longer operating periods without compromising on performance. The PBC3046E also boasts a 12-inch cutting bar, which strikes an ideal balance between maneuverability and cutting capacity, allowing it to handle larger jobs without becoming cumbersome.

Another notable characteristic of the PBC3046E is its lightweight design. Weighing significantly less than traditional gas-powered chainsaws, this model offers reduced user fatigue, enabling you to work for longer without discomfort. Furthermore, the chainsaw is equipped with an automatic chain oiler that ensures continuous lubrication, enhancing cutting performance and extending the life of the chain.

On the other hand, the RY70105A is an advanced brush cutter that highlights versatility in garden maintenance. This model is particularly effective for tackling tough vegetation and overgrown areas. One of its standout features is the powerful engine that provides high torque, enabling efficient cutting and trimming.

The RY70105A also incorporates an adjustable handle for enhanced comfort and control while in use. This ergonomic design minimizes strain on the user's hands and back, making it suitable for prolonged tasks. Moreover, this model is equipped with a variety of cutting heads, including a string trimmer head and a metal blade, allowing users to switch attachments based on the job requirements.

Both the PBC3046E and RY70105A represent Ryobi’s commitment to producing tools that are not only powerful but also environmentally conscious. With their battery-operated and fuel-efficient designs, these models significantly reduce emissions compared to conventional gas-powered equipment.

In summary, the Ryobi PBC3046E and RY70105A stand out for their cutting-edge technologies, user-centric designs, and commitment to sustainability, making them essential tools for any outdoor maintenance task. Whether you need to prune trees or clear brush, these tools are equipped to tackle the job efficiently and effectively.
Top Page Image Contents