Ryobi PBC3046E, RY70105A manual Troubleshooting, Problem Possible Cause Solution

Page 20

TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORISED SERVICE DEALER.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Engine will not start:

1. No spark.

1. Check spark. Remove sparking plug. Reattach

 

 

the sparking plug cap and lay sparking plug on

 

 

metal cylinder. Pull the starter rope and watch

 

 

for spark at sparking plug tip. If there is no

 

 

spark, repeat test with a new sparking plug.

 

2. No fuel.

2. Push primer bulb until bulb is full of fuel. If

 

 

bulb does not fill, primary fuel delivery system

 

 

is blocked. Contact a service dealer. If primer

 

 

bulb fills, engine may be flooded (see

 

 

next item).

 

3. Flooded engine.

3. Remove sparking plug and turn trimmer so

 

 

sparking plug hole is aimed at the ground.

 

 

Make sure lever is in the “WARM START”

 

 

position and pull starter cord 10 to 14 times.

 

 

This will clear excess fuel from engine. Clean

 

 

and reinstall sparking plug. With the throttle

 

 

trigger fully depressed, pull starter cord three

 

 

times with lever at “WARM START” position. If

 

 

engine does not start, move choke lever to

 

 

“COLD START” and follow normal starting

 

 

instructions in “STARTING AND STOPPING”

 

 

section. If engine still fails to start, repeat

 

4. Starter rope pulls harder now than

procedure with a new sparking plug.

 

when new.

4. Contact a service dealer.

 

 

 

 

Lever will not go into the

Throttle trigger is depressed.

Release throttle trigger. Refer to “Starting and

“COLD START” position:

 

Stopping” earlier in this manual.

 

 

 

 

Engine starts but will not

Carburettor requires adjustment.

*Turn “L” needle anticlockwise 1/16 turn. If “L” low

accelerate:

 

needle cannot be turned anticlockwise; do not force

 

 

plastic limiter caps. Contact a service dealer. See

 

 

Figure 27.

 

 

 

 

 

Engine does not reach full speed and emits excessive smoke:

1.Check oil fuel mixture.

2.Air filter dirty.

3.Carburettor requires adjustment.

1.Use fresh fuel and the correct 2-cycle oil mix.

2.Clean air filter. Refer to “Replacing and Cleaning Air Filter” earlier in this manual.

3.Turn “H” needle clockwise 1/16 - 1/8 turn. See Figure 27.

Engine starts, runs, and

Carburettor requires adjustment.

Turn idle speed screw clockwise to increase

accelerates but will not

 

idle speed. See Figure 27.

idle:

 

 

 

 

 

Blade continues to rotate at

Carburettor requires adjustment.

Turn idle speed screw anticlockwise to reduce

idle speed:

 

idle speed. See Figure 27. If after adjustment,

 

 

blade continues to rotate, return to an authorised

 

 

service dealer for repair.

 

 

 

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OPERATOR’S Manual Table of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data Vibration level racingFeatures UnpackingInstructions Packing List for OWNER’S KITAssembly Attaching the Power Head to the Trimmer AttachmentRemoving the Attachment from the Power Head Attaching the Storage HangerAttaching the Handle Attaching the Shoulder Strap Silencer GuardDrive Connector Spool Retainer Blade GuardGrass Deflector Converting from Trimmer to BrushcutterInstalling the Blade Installing the String HeadConverting from Brushcutter to Trimmer Removing the BladeOperating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT- OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade Ignition Switch Starting and StoppingTo Start a Cold Engine To Start a Warm EngineMaintenance Spool Replacement EZ Line TAP Advance SystemNEW PRE-WOUND Spool See Figures 18String Replacement Blade ProtectorSpring Arrows on Spool Anchor Hole First StringCleaning the Exhaust Port and Silencer Replacing and Cleaning AIR FilterSpark Arrester See Figures 25Storage 1 Month or Longer Fuel CAPSparking Plug Troubleshooting Problem Possible Cause SolutionIdle Speed Screw Needle Warranty Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model noPage Ryobi Technologies GmbH

RY70105A, PBC3046E specifications

The Ryobi PBC3046E and RY70105A are remarkable tools that exemplify innovation and efficiency in outdoor power equipment. Designed for both home and professional use, these models offer a blend of power, versatility, and user-friendly features.

The Ryobi PBC3046E is a high-performance battery-powered chainsaw that operates with a robust 3046 system. This tool is designed for cutting through various types of wood, making it an excellent choice for homeowners and landscapers alike. One of its main features is the brushless motor technology which provides increased efficiency and runtime. This means users can enjoy longer operating periods without compromising on performance. The PBC3046E also boasts a 12-inch cutting bar, which strikes an ideal balance between maneuverability and cutting capacity, allowing it to handle larger jobs without becoming cumbersome.

Another notable characteristic of the PBC3046E is its lightweight design. Weighing significantly less than traditional gas-powered chainsaws, this model offers reduced user fatigue, enabling you to work for longer without discomfort. Furthermore, the chainsaw is equipped with an automatic chain oiler that ensures continuous lubrication, enhancing cutting performance and extending the life of the chain.

On the other hand, the RY70105A is an advanced brush cutter that highlights versatility in garden maintenance. This model is particularly effective for tackling tough vegetation and overgrown areas. One of its standout features is the powerful engine that provides high torque, enabling efficient cutting and trimming.

The RY70105A also incorporates an adjustable handle for enhanced comfort and control while in use. This ergonomic design minimizes strain on the user's hands and back, making it suitable for prolonged tasks. Moreover, this model is equipped with a variety of cutting heads, including a string trimmer head and a metal blade, allowing users to switch attachments based on the job requirements.

Both the PBC3046E and RY70105A represent Ryobi’s commitment to producing tools that are not only powerful but also environmentally conscious. With their battery-operated and fuel-efficient designs, these models significantly reduce emissions compared to conventional gas-powered equipment.

In summary, the Ryobi PBC3046E and RY70105A stand out for their cutting-edge technologies, user-centric designs, and commitment to sustainability, making them essential tools for any outdoor maintenance task. Whether you need to prune trees or clear brush, these tools are equipped to tackle the job efficiently and effectively.
Top Page Image Contents