Ryobi RY70105A, PBC3046E manual Blade Protector, String Replacement, Spring, Second String Slot

Page 17

MAINTENANCE

STRING REPLACEMENT

See Figures 20 and 21.

1.Stop the engine, disconnect the sparking plug wire. Hold the string head and unscrew the spool re- tainer. Turn clockwise.

2.Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool.

3.Cut two pieces of string, each being approximately 2.7 m (9 ft) long.

4.Insert the first string into the anchor hole in the upper part of the spool. Wind the first string round the upper part of the spool anticlockwise, as shown by the arrows on the spool. Place string in the slot on upper spool flange, leaving about 152 mm (6 in) extended beyond the slot. Do not overfill. After winding the string, there should be at least 6 mm (1/4 in) between the wound string and the outside edge of the spool.

5.Repeat above step with second string, using the bottom part of spool. Do not overfill.

6.Replace the spool and the spool retainer. Refer to “Spool Replacement “ earlier in this manual.

SPRING

SPOOL

ARROWS ON

SPOOL

ANCHOR

HOLE

FIRST STRING

Fig. 20

 

FIRST STRING

SLOT

SECOND

STRING

Fig. 22

SLOT

ARROWS ON

 

SPOOL

Fig. 23

BLADE PROTECTOR

See Figures 24.

Always place the blade protector on the blade when the unit is not in use. The blade protector has clips round the edges to snap over the blade and keep it in place. Wear gloves and be cautious when handling the blade.

NOTE: Always remove the blade protector before using the unit. If not removed, the blade protector could become a thrown object as the blade begins to turn.

BLADE

Fig. 21

BLADE

CLIPS

 

PROTECTOR

Fig. 24

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation SymbolsVibration level racing Technical DataUnpacking FeaturesInstructions Packing List for OWNER’S KITAttaching the Power Head to the Trimmer Attachment AssemblyRemoving the Attachment from the Power Head Attaching the Storage HangerAttaching the Handle Silencer Guard Attaching the Shoulder StrapBlade Guard Drive Connector Spool RetainerGrass Deflector Converting from Trimmer to BrushcutterInstalling the String Head Installing the BladeConverting from Brushcutter to Trimmer Removing the BladeOperating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT- OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade Starting and Stopping Ignition SwitchTo Start a Cold Engine To Start a Warm EngineSpool Replacement EZ Line TAP Advance System MaintenanceNEW PRE-WOUND Spool See Figures 18Blade Protector String ReplacementSpring Arrows on Spool Anchor Hole First StringReplacing and Cleaning AIR Filter Cleaning the Exhaust Port and SilencerSpark Arrester See Figures 25Storage 1 Month or Longer Fuel CAPSparking Plug Problem Possible Cause Solution TroubleshootingIdle Speed Screw Needle Safety Directive WarrantyGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model noPage Ryobi Technologies GmbH

RY70105A, PBC3046E specifications

The Ryobi PBC3046E and RY70105A are remarkable tools that exemplify innovation and efficiency in outdoor power equipment. Designed for both home and professional use, these models offer a blend of power, versatility, and user-friendly features.

The Ryobi PBC3046E is a high-performance battery-powered chainsaw that operates with a robust 3046 system. This tool is designed for cutting through various types of wood, making it an excellent choice for homeowners and landscapers alike. One of its main features is the brushless motor technology which provides increased efficiency and runtime. This means users can enjoy longer operating periods without compromising on performance. The PBC3046E also boasts a 12-inch cutting bar, which strikes an ideal balance between maneuverability and cutting capacity, allowing it to handle larger jobs without becoming cumbersome.

Another notable characteristic of the PBC3046E is its lightweight design. Weighing significantly less than traditional gas-powered chainsaws, this model offers reduced user fatigue, enabling you to work for longer without discomfort. Furthermore, the chainsaw is equipped with an automatic chain oiler that ensures continuous lubrication, enhancing cutting performance and extending the life of the chain.

On the other hand, the RY70105A is an advanced brush cutter that highlights versatility in garden maintenance. This model is particularly effective for tackling tough vegetation and overgrown areas. One of its standout features is the powerful engine that provides high torque, enabling efficient cutting and trimming.

The RY70105A also incorporates an adjustable handle for enhanced comfort and control while in use. This ergonomic design minimizes strain on the user's hands and back, making it suitable for prolonged tasks. Moreover, this model is equipped with a variety of cutting heads, including a string trimmer head and a metal blade, allowing users to switch attachments based on the job requirements.

Both the PBC3046E and RY70105A represent Ryobi’s commitment to producing tools that are not only powerful but also environmentally conscious. With their battery-operated and fuel-efficient designs, these models significantly reduce emissions compared to conventional gas-powered equipment.

In summary, the Ryobi PBC3046E and RY70105A stand out for their cutting-edge technologies, user-centric designs, and commitment to sustainability, making them essential tools for any outdoor maintenance task. Whether you need to prune trees or clear brush, these tools are equipped to tackle the job efficiently and effectively.
Top Page Image Contents