Operating Procedures, Typical Operating Positions

OPERATING PROCEDURES

WARNING

Wear goggles or safety glasses at all times when operating this unit.

TYPICAL OPERATING POSITIONS

1Use the blower for trees, shrubs, flower beds and hard-to-clean areas (Fig. 19).

Fig. 19

2.Use the unit around buildings and for other normal cleaning (Fig. 20).

Fig. 20

3.Use the blower for walls, overhangs and screens (Fig. 21).

Fig. 21

VACUUM OPERATING PROCEDURES - (OPTIONAL FOR MODEL 310r)

WARNING

DO NOT OPEN THE DOOR WITH THE ENGINE RUNNING! To do so can result in serious personal injury caused by contact with the rotating blades.

NOTE: Do not wear rubber or any other insulated gloves to avoid static electricity shock.

1.Move the unit slowly back and forth over the debris to be vacuumed (Fig. 22).

Fig. 22

2.Vacuum a large pile of debris working from the out- side of the pile. Do not force the suction tube into the debris because this can clog the tube.

3.Empty the collection bag after each use. Shake the bag vigorously while emptying to remove dust from the bag, which can block the proper amount of air flow and deteriorate the performance of the vacuum.

NOTE: Use the zipper when emptying the collection bag. Do not empty the bag through the nozzle.