Ryobi 310r manual Symbol, Signification

Page 5

SAFETY WARNINGS (Continued)

SYMBOL

SIGNIFICATION

UNLEADED FUEL.

Always use clean, fresh unleaded fuel.

• PRIMER BULB.

Push primer bulb, fully and slowly, 5 to 7 times.

CHOKE CONTROL.

FULL CHOKE position.

CHOKE CONTROL.

PARTIAL CHOKE position.

CHOKE CONTROL.

RUN position.

I

IGNITION / POWER SWITCH.

 

O

ON / START / RUN

IGNITION / POWER SWITCH.

 

 

OFF OR STOP

 

HOT SURFACE WARNING.

 

Do not touch a hot muffler, gear box or cylinder.

 

You may get burned. These parts get extremely

 

hot from operation and remain hot for a short

 

time after the unit is turned off.

 

BLOWERS AND BLOWER / VACUUMS –

 

ROTATING BLADES CAN CAUSE SEVERE

 

INJURY.

 

Stop the engine or motor before opening the

 

vacuum door or installing / changing tubes.

 

Do not put hands or any other objects into the

 

vacuum tubes while they are installed on this unit.

5

Image 5
Contents For Starting Instructions Refer to OPERATOR’S ManualIntroduction Table of Contents California Emission Regulations Safety WarningsFueling and PRE-OPERATION During OperationAfter Operation Safety and International SymbolsSymbol Signification Signification SymbolBlower Tube and Nozzle Assembly Both Models Assembly InstructionsAssembly Instructions Installing the Vacuum Tubes to the Blower/Vac Installing the Vacuum Tubes Optional for Model 310rOIL & Fuel Information Stopping STARTING/STOPPING InstructionsStarting Typical Operating Positions Operating ProceduresVacuum Operating Procedures Optional for Model 310r AIR Filter Maintenance Maintenance and Repair InstructionsMaintenance Schedule Adjusting the Carburetor Carburetor AdjustmentZama Carburetor Walbro CarburetorExhaust Exit Tube Removal INSPECTING/CLEANING the MufflerReplacing the Spark Plug Muffler Reassembly Inspection and CleaningSpecifications Cleaning and StorageEngine BlowerProblem Cause Action TroubleshootingYour Warranty Rights and Obligations California Emission Control Warranty StatementRyobi America Corp