Installing the Vacuum Tubes Optional for Model 310r

ASSEMBLY INSTRUCTIONS (Continued)

5.Grasping the upper vac tube firmly with both hands (Fig. 9), turn the vac tube clockwise (Fig. 10) until the tabs of the adapter (2) snap into the square indentations of the upper vac tube (2) (Fig. 11).

NOTE: This assembly requires the use of both hands because the parts fit together tightly.

Fig. 9

NOTE: The flat on the upper tube should face the handle as you install the tube (Fig. 13).

Adapter

Fig. 10

Fig. 11

NOTE: When the tabs lock into the indentations, the adapter and vacuum tube become a permanent assembly. The adapter cannot be removed from the vacuum tube.

INSTALLING THE VACUUM TUBES - (OPTIONAL FOR MODEL 310r)

NOTE: Do not install tubes while unit is running.

1.Align the arrow on the lower vacuum tube with the arrow on the upper vacuum tube (Fig. 12).

2.Grasping the lower vac tube firmly with both hands, push the lower vac tube into the upper vac tube. Turn the lower vac tube clockwise until it snaps into detent and locks. (The dot on the lower tube aligns with the dot on the upper tube) when properly assembled.

Upper Vac

Tube

Lower Vac Tube

Fig. 12

Installing the Vacuum Tubes to the Blower/Vac

NOTE: Do not install tubes while unit is running.

1.Grasp the assembled tube firmly with both hands. Turn the tube/adapter clockwise as far as possible to the end of the grooves until it snaps into the detent and locks (Fig. 13).

NOTE: When the tube is installed correctly, the flat on the upper tube faces the handle on the blower/vac (Fig. 13).

Handle

Flat

Fig. 13