Ryobi RY52014 manual Operation, Preparation for Cutting, See Figures 5

Page 10

ASSEMBLY

FILLING TANK

Clean surface around fuel cap to prevent contamina- tion.

Loosen fuel cap slowly. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Prior to replacing the fuel cap, clean and inspect the gasket.

Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting the engine. Do not smoke!

OPERATION

WARNING:

Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields, a hard hat, and safety shoes when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

WARNING:

To avoid kickback, binding of the saw bar, and possible injury, never cut limbs that the pruner does not reach when supported by the shoulder strap.

APPLICATIONS You may use this tool for the purposes listed below:

Limbing

Pruning

PREPARATION FOR CUTTING

See Figures 5 - 8.

Wear non-slip gloves for maximum grip and protection.

�Maintain a proper grip on the unit whenever the engine is running. Use your right hand to firmly grip the rear handle while your left hand has a firm grip on the front handle.

�Hold unit firmly with both hands. Always keep your left hand on the front handle and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line.

�Never stand directly under the limb you are cutting.

�Always wear shoulder strap for increased safety and to support the pruner.

Be certain the knob is fully tightened before operating equipment; check it periodically for tightness during use to avoid serious injury.

BASIC CUTTING PROCEDURE

Follow the steps below to prevent damage to tree or shrub bark. Do not use a back-and-forth sawing motion.

Accelerate the engine to full throttle just before entering the cut by squeezing the throttle trigger. Keep the engine at full throttle the entire time you are cutting.

Make a shallow first cut (1/4 of limb diameter) on the underside of the limb close to the main limb or trunk.

Make a second cut from the top side of the limb outboard from the first cut.

Make a final cut close to trunk.

LOAD SECOND CUT

FIRST CUT 1/4 DIAMETER

FINAL CUT

Fig. 5

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules RefuelingSymbols Symbol Name DESIGNATION/EXPLANATIONService Know Your Pruner Product SpecificationsEngine Switch Barrier HandleUnpacking AssemblyInstalling the Shoulder Strap and Hanger Packing ListFueling and Refueling the Pruner Chain OilerPremium Exact MIX Preparation for Cutting OperationSee Figures 5 See Figures 8 Limbing and PruningCutting Guide MaximumStarting and Stopping Position for StartingSee Figures 10 Chain Tension MaintenanceGeneral Maintenance See Figures 13Chain BAR BAR NUT Replacing the BARSee Figures 15 BAR NUT Chain Tensioning ScrewIdle Speed Screw Idle Speed AdjustmentChain Maintenance Chain Oiler Tank Replace CAP RemoveSpark Arrestor HOW to Sharpen the CuttersCleaning the Exhaust Port and Muffler See Figures 24Spark Plug Replacing and Cleaning AIR FilterFuel CAP Storage 1 Month or LongerTroubleshooting Problem Cause RemedyWarranty Limited Warranty StatementMaintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageThis Product WAS Manufactured with a Catalyst Muffler Service Model NO. and Serial no California Proposition

RY52014 specifications

The Ryobi RY52014 is a powerful and versatile gas-powered string trimmer designed for both residential and commercial use. This machine stands out in the market for its combination of efficiency, durability, and ease of use. One of the key features of the RY52014 is its high-performance 2-cycle engine that delivers impressive cutting power, making quick work of thick grass and weeds.

Equipped with a 30cc engine, the Ryobi RY52014 provides an excellent balance between performance and weight. Users will appreciate its lightweight design, which minimizes fatigue during extended use. The trimmer's gas-powered nature ensures it can operate for extended periods without the need for recharging, making it ideal for larger properties or challenging terrains where battery-operated tools might struggle.

A standout feature of the Ryobi RY52014 is its innovative 0.095-inch line and a dual-line bump feed head. This allows for easy line advancement, enabling users to quickly continue their trimming tasks without interruption. The heavy-duty construction of the head ensures durability, allowing it to withstand rigorous use over time. Additionally, the trimmer's cutting width of 16 inches provides broad coverage, reducing the time spent on mowing lawns and gardens.

Another noteworthy technology incorporated in the RY52014 is the Easy Start system, which simplifies the starting process. This system significantly reduces the effort required to pull the starting cord, making it easier for users of all skill levels to operate. The trimmer also features a convenient debris guard that helps protect the user’s legs from flying debris while enhancing safety during operation.

The adjustable handlebars on the Ryobi RY52014 provide added comfort and control. The design allows users to tailor the handle height and position, reducing strain and improving ergonomics. This feature becomes especially valuable during long periods of use, where comfort can significantly affect productivity.

In conclusion, the Ryobi RY52014 string trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for anyone in need of a reliable tool for lawn maintenance. With its robust construction, advanced technologies, and practical design, this string trimmer can meet the demands of both casual gardeners and seasoned professionals alike, ensuring a well-manicured lawn with minimal effort.
Top Page Image Contents