Ryobi RY52014 manual Idle Speed Adjustment, Chain Maintenance, Idle Speed Screw

Page 15

MAINTENANCE

IDLE SPEED ADJUSTMENT

See Figure 21.

If the chain turns at idle, the idle speed screw needs adjusting on the engine. Turn the idle speed screw counterclockwise to reduce the idle RPM and stop the chain movement. If the saw chain still moves at idle speed, contact a service dealer for adjustment and discontinue use until the repair is made.

WARNING:

The saw chain should never turn at idle. Turn the idle speed screw counterclockwise to reduce the idle RPM and stop the chain, or contact a service dealer for ad- justment and discontinue use until the repair is made. Serious personal injury may result from the saw chain turning at idle.

IDLE

SPEED SCREW

Fig. 21

CHAIN OILER

See Figure 22.

Use Premium Bar and Chain Oil. It is designed for chains and chain oilers and is formulated to perform over a wide temperature range with no dilution required.

Remove the cap and carefully pour approximately 8 oz. of bar and chain oil into the chain oiler tank.

Replace the cap and tighten securely.

Check and refill the chain oiler tank every time the engine is fueled.

NOTE: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the oil pump, bar, or chain.

CHAIN OILER TANK

REPLACE

CAP

REMOVE

CAP

Fig. 22

CHAIN MAINTENANCE

See Figure 23.

For smooth and fast cutting, the chain needs to be main- tained properly. The following conditions indicate that the chain requires sharpening:

Wood chips are small and powdery

Chain must be forced through the wood during cutting

Chain cuts to one side

During maintenance of the chain, consider the following:

Improper filing angle of the side plate can increase the risk of a severe kickback.

Depth gauge (or raker clearance) setting determines the height the cutter enters the wood and the size of the wood chip that is removed. Too much clearance increases the potential for kickback. Too little clearance decreases the size of the wood chip thus decreasing the chain's cutting ability.

If cutter teeth have hit hard objects such as nails and stones, or have been abraded by mud or sand on the wood, have service dealer sharpen chain.

RAKER (DEPTH GAUGE) CLEARANCE

.025 in.

(0.6 mm)

Fig. 23

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesRefueling Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsService Barrier Handle Product SpecificationsEngine Switch Know Your PrunerPacking List AssemblyInstalling the Shoulder Strap and Hanger UnpackingChain Oiler Fueling and Refueling the PrunerPremium Exact MIX Operation Preparation for CuttingSee Figures 5 Maximum Limbing and PruningCutting Guide See Figures 8Position for Starting Starting and StoppingSee Figures 10 See Figures 13 MaintenanceGeneral Maintenance Chain TensionBAR NUT Chain Tensioning Screw Replacing the BARSee Figures 15 Chain BAR BAR NUTChain Oiler Tank Replace CAP Remove Idle Speed AdjustmentChain Maintenance Idle Speed ScrewSee Figures 24 HOW to Sharpen the CuttersCleaning the Exhaust Port and Muffler Spark ArrestorStorage 1 Month or Longer Replacing and Cleaning AIR FilterFuel CAP Spark PlugProblem Cause Remedy TroubleshootingLimited Warranty Statement WarrantyCoverage MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities Maintenance RequirementsThis Product WAS Manufactured with a Catalyst Muffler California Proposition Service Model NO. and Serial no

RY52014 specifications

The Ryobi RY52014 is a powerful and versatile gas-powered string trimmer designed for both residential and commercial use. This machine stands out in the market for its combination of efficiency, durability, and ease of use. One of the key features of the RY52014 is its high-performance 2-cycle engine that delivers impressive cutting power, making quick work of thick grass and weeds.

Equipped with a 30cc engine, the Ryobi RY52014 provides an excellent balance between performance and weight. Users will appreciate its lightweight design, which minimizes fatigue during extended use. The trimmer's gas-powered nature ensures it can operate for extended periods without the need for recharging, making it ideal for larger properties or challenging terrains where battery-operated tools might struggle.

A standout feature of the Ryobi RY52014 is its innovative 0.095-inch line and a dual-line bump feed head. This allows for easy line advancement, enabling users to quickly continue their trimming tasks without interruption. The heavy-duty construction of the head ensures durability, allowing it to withstand rigorous use over time. Additionally, the trimmer's cutting width of 16 inches provides broad coverage, reducing the time spent on mowing lawns and gardens.

Another noteworthy technology incorporated in the RY52014 is the Easy Start system, which simplifies the starting process. This system significantly reduces the effort required to pull the starting cord, making it easier for users of all skill levels to operate. The trimmer also features a convenient debris guard that helps protect the user’s legs from flying debris while enhancing safety during operation.

The adjustable handlebars on the Ryobi RY52014 provide added comfort and control. The design allows users to tailor the handle height and position, reducing strain and improving ergonomics. This feature becomes especially valuable during long periods of use, where comfort can significantly affect productivity.

In conclusion, the Ryobi RY52014 string trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for anyone in need of a reliable tool for lawn maintenance. With its robust construction, advanced technologies, and practical design, this string trimmer can meet the demands of both casual gardeners and seasoned professionals alike, ensuring a well-manicured lawn with minimal effort.
Top Page Image Contents