Ryobi RY52014 HOW to Sharpen the Cutters, Cleaning the Exhaust Port and Muffler, Spark Arrestor

Page 16

MAINTENANCE

HOW TO SHARPEN THE CUTTERS

See Figures 24 - 27.

Be careful to file all cutters to the specified angles and to the same length, as fast cutting can be obtained only when all cutters are uniform.

PARTS OF A CUTTER

TOP PLATE

CUTTING CORNER

 

 

 

 

 

 

SIDE PLATE

 

RIVET HOLE

 

DEPTH GAUGE

 

 

 

HEEL

 

 

 

 

GULLET

TOE

Fig. 24

 

 

Tighten the chain tension enough that the chain does not wobble. Do all of your filing at the mid-point of the bar. Wear gloves for protection.

Use a 5/32 in. diameter round file and holder.

Keep the file level with the top plate of the tooth. Do not let the file dip or rock.

Put a few firm strokes on every tooth. File all left hand cutters in one direction. Then move to the other side and file the right hand cutters in the opposite direction. Oc- casionally remove filings from the file with a wire brush.

LEFT HAND

CUTTERS

RIGHT HAND

CUTTERS

Fig. 27

CAUTION:

Dull or improperly sharpened chain can cause excessive engine speed during cutting which may result in severe engine damage.

Fig. 25

Using light but firm pressure, stroke towards the front corner of the tooth. Lift file away from the steel on each return stroke.

WARNING:

Improper chain sharpening increases the potential of kickback. Failure to replace or repair damaged chain can cause serious injury.

CLEANING THE EXHAUST PORT AND MUFFLER

Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a power loss with your gas powered tool, a quali- fied service technician will need to remove these deposits to restore performance.

SPARK ARRESTOR

The spark arrestor must be cleaned or replaced every 25 hours or yearly to ensure proper performance of your product. For the location of the spark arrestor and specific cleaning in- structions, contact your nearest authorized service center.

Fig. 26

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules RefuelingSymbols Symbol Name DESIGNATION/EXPLANATIONService Product Specifications Engine SwitchKnow Your Pruner Barrier HandleAssembly Installing the Shoulder Strap and HangerUnpacking Packing ListFueling and Refueling the Pruner Chain OilerPremium Exact MIX Preparation for Cutting OperationSee Figures 5 Limbing and Pruning Cutting GuideSee Figures 8 MaximumStarting and Stopping Position for StartingSee Figures 10 Maintenance General MaintenanceChain Tension See Figures 13Replacing the BAR See Figures 15Chain BAR BAR NUT BAR NUT Chain Tensioning ScrewIdle Speed Adjustment Chain MaintenanceIdle Speed Screw Chain Oiler Tank Replace CAP RemoveHOW to Sharpen the Cutters Cleaning the Exhaust Port and MufflerSpark Arrestor See Figures 24Replacing and Cleaning AIR Filter Fuel CAPSpark Plug Storage 1 Month or LongerTroubleshooting Problem Cause RemedyWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage OWNER’S Warranty ResponsibilitiesMaintenance Requirements CoverageThis Product WAS Manufactured with a Catalyst Muffler Service Model NO. and Serial no California Proposition

RY52014 specifications

The Ryobi RY52014 is a powerful and versatile gas-powered string trimmer designed for both residential and commercial use. This machine stands out in the market for its combination of efficiency, durability, and ease of use. One of the key features of the RY52014 is its high-performance 2-cycle engine that delivers impressive cutting power, making quick work of thick grass and weeds.

Equipped with a 30cc engine, the Ryobi RY52014 provides an excellent balance between performance and weight. Users will appreciate its lightweight design, which minimizes fatigue during extended use. The trimmer's gas-powered nature ensures it can operate for extended periods without the need for recharging, making it ideal for larger properties or challenging terrains where battery-operated tools might struggle.

A standout feature of the Ryobi RY52014 is its innovative 0.095-inch line and a dual-line bump feed head. This allows for easy line advancement, enabling users to quickly continue their trimming tasks without interruption. The heavy-duty construction of the head ensures durability, allowing it to withstand rigorous use over time. Additionally, the trimmer's cutting width of 16 inches provides broad coverage, reducing the time spent on mowing lawns and gardens.

Another noteworthy technology incorporated in the RY52014 is the Easy Start system, which simplifies the starting process. This system significantly reduces the effort required to pull the starting cord, making it easier for users of all skill levels to operate. The trimmer also features a convenient debris guard that helps protect the user’s legs from flying debris while enhancing safety during operation.

The adjustable handlebars on the Ryobi RY52014 provide added comfort and control. The design allows users to tailor the handle height and position, reducing strain and improving ergonomics. This feature becomes especially valuable during long periods of use, where comfort can significantly affect productivity.

In conclusion, the Ryobi RY52014 string trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for anyone in need of a reliable tool for lawn maintenance. With its robust construction, advanced technologies, and practical design, this string trimmer can meet the demands of both casual gardeners and seasoned professionals alike, ensuring a well-manicured lawn with minimal effort.
Top Page Image Contents